Series SAV-BT Angle Seat Valve – Bronze NPT
Actualizado: 2024-01-18
Save space while maintaining flow rates with the compact Series SAV-BT Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical spring for fail-safe operation. Select from either normally closed (NC) or normally open (NO) configurations. Bi-directional valves (normally closed) are designed for special applications that require flow in both directions and incorporate an anti-water hammer design for liquid applications flowing under the seat. Normally open valves can also be used to prevent water hammer on valve closure in liquid applications.
Series SAV-ST Angle Seat Valve – Stainless Steel NPT
Actualizado: 2024-01-18
Save space while maintaining flow rates with the compact Series SAV-ST Angle Seat Valve. The pneumatic, externally piloted angle seat valve is operated by a single acting actuator with a mechanical spring for fail-safe operation. Select from either normally closed (NC) or normally open (NO) configurations. Bi-directional valves (normally closed) are designed for special applications that require flow in both directions and incorporate an anti-water hammer design for liquid applications flowing under the seat. Normally open valves can also be used to prevent water hammer on valve closure in liquid applications.
Series BICV Brass Inline Check Valve
Actualizado: 2024-01-18
The Series BICV Brass Inline Check Valves are ideal for use with a broad array of service mediums including compatible oils, gases, fuels and hydrocarbons. They incorporate a soft seat for a bubble-tight shutoff and are spring-loaded for rapid reseating at high and low temperatures. The Series BICV was designed with a smooth flow profile to minimize head loss and accumulation of debris. The low 0.5 psi (0.004 bar) cracking pressure and patented guided-disc technology ensure reliability at low and high service pressure.California Residents: Click Here for Proposition 65 WARNING.on is resistant to harmful components often found in sample streams. Replaceable filter elements remove particles and droplets as small as .001 micron with 95% efficiency.
Series DCV/RDCV Diaphragm Valve
Actualizado: 2024-01-18
The Series DCV/RDCV Diaphragm Valves are ideal for use with the Series DCT1000and Series DCT500 duct collection timer boards for controlling the air pulse in jet pulse
type dust collectors to clean the filters. Both the Series DCV and RDCV have the
option for either coupling or NPT connections. The coupling connection allows for a
quick and simple installation. Only the stub pipe and blowtube need to be cleaned and
deburred before the valve is fit into position. The “T” Series DCV has female threaded
connections. Both the “C” and “T” versions have a 90° angle between the inlet and
outlet the most suitable configuration for pulse valve applications. The design offers not
only ease of installation, but also minimal airflow restriction for an exceptional cleaning
pulse. The valves are offered in both integrated and remote coil configurations.
Series DCS/RDCS Springless Diaphragm Valves
Actualizado: 2024-01-18
The Series DCS/RDCS Springless Dust Collection Valves are ideal for use with the Series DCT1000 and Series DCT500 duct collection timer boards. A springless design offers not only durability, but also reliability for an exceptional cleaning pulse. Both the Series DCS and RDCS have the option for either coupling or NPT connections. The coupling connection allows for a quick and simple installation. Only the stub pipe and blowtube need to be cleaned and deburred before the valve is fit into position. The “T° Series DCS has female threaded connections and the “C° Series DCS has a coupling connection. Both the “T° and “C° versions have a 90° angle between the inlet and outlet: the most suitable configuration for pulse valve applications. The valves are offered in both integrated and remote coil configurations.
Series 2000VA/3000WA Hi-Flow™ Control Valve
Actualizado: 2024-01-18
W.E. Anderson Hi-Flow™ control valves are single seated, top or cage guided globe valves - probably the simplest, from construction standpoint, yet most versatile control valve in use. The Hi-Flow™ control valve can fit applications with a smaller size since the valve has a greater flow capacity than most conventional valves of the same size.
Series HGV Hand Operated Globe Valve
Actualizado: 2024-01-18
The Series HGV Hand Operated Globe Valve is an economical and functional alternative to large actuator/control valve packages. Metal-to-metal seating ensures excellent flow control and shut-off service. The body and bonnet are each constructed of CF8M (316) SS for superb corrosion resistance and chemical compatibility.
Series PGV Compact Plug Valve
Actualizado: 2024-01-18
The Series PGV Compact Plug Valves are designed to stop forward flow of up to 3000 psig with ease. The combination of 1/4 turn operation and low operating torque allows for quick opening and closing providing positive shut off to instrumentation and process systems. The PGV series comes in either fractional tube fitting or female NPT connections. Available in either 316 stainless steel or brass, the one-piece body makes this valve an economical choice for your application.California Residents: Click Here for Proposition 65 WARNING.
Series NVII Needle Valve
Actualizado: 2024-01-18
The Model NVII Needle Valves provide easy flow regulation in all applications, including shut off and throttling for pressure gages and instruments. With a one piece, hot forged brass body construction, years of maintenance-free service can be expected. The Model NVII, with its tamper-proof design and blowout-proof stem, provides excellent performance and reliability.California Residents: Click Here for Proposition 65 WARNING.
