Model F195 Disposable In-Line Filter
Actualizado: 2024-01-04
Remove 99.99% of unwanted particles from within your gas flow with the Model F195 Disposable In-Line Filter. Encapsulated microfiber filter elements are able to filter particles as small as 0.1 micron. Filters are completely disposable - simply remove the filter from your line and throw it away when it becomes dirty. The transparent nylon housing makes it simple to determine if the filter needs to be changed.
Model F222/F451 Liquid/Particle Filter
Actualizado: 2024-01-04
Compressed air filters protect equipment and instrumentation from harmful contaminants such as dirt, water and oil. Liquids are continuously coalesced and released through the manual drain valves. Replaceable filter element removes particles and droplets as small as 0.001 micron with 93% efficiency. Units have 1/4\" female NPT inlet and outlet and manual drain valve.
Series F700 Nylon Filter
Actualizado: 2024-01-04
The F700 Series of filters is ideal for the filtering of liquids or gasses in low pressure systems. The nylon construction is resistant to harmful components often found in sample streams. Replaceable filter elements remove particles and droplets as small as .001 micron with 95% efficiency.
Series A-5000 Shut-Off Valve
Actualizado: 2024-01-04
The Series A-5000 3-Way Shut-Off Valve is constructed of solid gray PVC, has Buna-N seals, and a rotating flag handle. The A-5000 can withstand a maximum operating pressure of 125 psi (8.6 bar) and a maximum temperature of 140°F (60°C). The handle has 180° rotation and lies directly over the open port. When the handle is rotated 90° from either port, flow is shut off to both outlet ports. Since the bottom port on the valve is common, the Series A-5000 can be used as a diverter or a selecting valve. These valves can be used to conveniently hook 3 instruments together, as well as testing various gages and transmitters.
Series PS Pressure Snubber
Actualizado: 2024-01-04
The Series PS Pressure Snubber is designed to protect pressure instrumentation bydampening surges and pulsations and assuring steady average pressure readings.
Snubbers are available in a variety of pore sizes for use with gases, water, and oils.
California Residents: Click Here for Proposition 65 WARNING.
Series GG Gage Guard
Actualizado: 2024-01-04
Protecting pressure or vacuum instruments from clogging, corrosion, or damage, the Series GG Gage Guard provides a protective barrier between the process fluid and the instrument. The hermetically-sealed uni-body protects from the possibility of leaking. Glass-filled Polypropylene housing is suitable for most inorganic chemicals and temperatures up to 185°F (85°C). A fluid fill station is recommended for proper installation.
Series A-1000 Stainess Steel Fitting Line
Actualizado: 2024-01-04
The Dwyer Series A-1000 quality tube fittings have been designed and manufactured to provide reliable leak-free connections in a wide variety of applications. A reliable leak-free tubing system will be achieved by combining the proper selection and handling of tubing with the proper tube fitting selection and installation. The following information is provided to assist in the tube selection.
Static Pressure Tips & Accessories
Actualizado: 2024-01-04
These sensors are for use with manometers, Magnehelic® gages, pressure switches, and other controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input, discharge pressures, etc. The angled tips shown have 4\" insertion depth. Each has four radially drilled .0040\" sensing holes. All except Model A-3003 mount in 3/8\" hole in duct. For portable use, a magnet holds No. A-3003 in place. No. A-3005 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-3008 are suitable for use in low-velocity systems or where the need for accuracy is less critical.
