Mostrando 1–12 de 206 resultados

STRAIN-GAUGE EMBEDDED ANALOGUE AMPLIFIERS

Código: ????
Valorado con 0 de 5

Actualizado: 2024-01-04

These analogue amplifiers convert the signal from a Wheatstone bridge (mV/V) into a robust industrial standardised analogue signal.
o Internal or external mounting depending on the size of the transducer
o If external, cylindrical housing in nickel-plated brass (IP67) or rectangular box in aluminium (low-cost version) (IP65)
o Available version with shifted zero for bidirectional utilisation for versions 4...020 mA and 0...10 V.
o Protection against inversion of polarity
o Cable length: 0.015 m between the amplifier housing and the transducer (max. 0.5 m)

STRAIN-GAUGE EMBEDDED DIGITAL CONVERTERS

Código: ????
Valorado con 0 de 5

Actualizado: 2024-01-04

These digital converters convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB
o Very high resolution
o Linearisation of transducer signal available
o High transmission speed
o Internal or external mounting depending on the size of the transducer
o When external, rectangular box in aluminium (protection class IP65)

AVAILABLE OPTIONS- temperature measurement with compensation of thermal drifts

STRAIN-GAUGE EMBEDDED ANALOGUE AMPLIFIERS

Código: ????
Valorado con 0 de 5

Actualizado: 2024-01-04

These analogue amplifiers convert the signal from a Wheatstone bridge (mV/V) into a robust industrial standardised analogue signal.
o Internal or external mounting depending on the size of the transducer
o If external, cylindrical housing in nickel-plated brass (IP67) or rectangular box in aluminium (low-cost version) (IP65)
o Available version with shifted zero for bidirectional utilisation for versions 4...020 mA and 0...10 V.
o Protection against inversion of polarity
o Cable length: 0.015 m between the amplifier housing and the transducer (max. 0.5 m)

STRAIN-GAUGE EMBEDDED DIGITAL CONVERTERS

Código: ????
Valorado con 0 de 5

Actualizado: 2024-01-04

These digital converters convert the signal from a Wheatstone bridge (mV/V) into a standardised digital signal RS-232, RS-485 or USB
o Very high resolution
o Linearisation of transducer signal available
o High transmission speed
o Internal or external mounting depending on the size of the transducer
o When external, rectangular box in aluminium (protection class IP65)

AVAILABLE OPTIONS- temperature measurement with compensation of thermal drifts

ANALOGUE INPUT PANEL METERS

Código: INDI-PAXS DISP-PAXx
Valorado con 0 de 5

Actualizado: 2024-01-04

Universal panel meters to be used with transducers and process signalso Strain gauge, process, voltage and current inputs
o Intuitive and easy programming (high flexibility)
o 016 points scaling for linearisation
o Programmable function keys/user inputs
o Variable intensity displayAVAILABLE OPTIONS- Analogue output 4 (0)...020 mA or 0...10 V
- 2 or 4 set-points with relay outputs
- RS-232, RS-485, USB or fieldbus capabilities
- NEMA 4X / IP67 (transparent protection cover - Option \"COVER PAX\")
- Desktop or industrial steel housing
- Rail DIN adaptor

DISPLAY FOR ROTARY TORQUE SENSOR

Código: DISP-60
Valorado con 0 de 5

Actualizado: 2024-01-04

The DISP-60 is a display specially designed to be connected with a non-contact rotary torque sensor of the SENSY 60000 series.
o 1 torque sensor input 0...10 V
o 1 angle encoder input (A/B) or speed sensor input (A)
o 2 x digital input
o 2 x relay output
o USB interface (2.0 HID - Windows ® compatible software included)
o SD card slot (SD / SD HC)
o Acquisition interval: 10 ms...1 h

CONDITIONERS – AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCERS

Código: COND-SGA
Valorado con 0 de 5

Actualizado: 2024-01-04

The COND-SGA conditioners - amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on strain-gauge technology.
o Input: Wheatstone bridge 0.1 to 30 mV/V
o Output: 4(0)...020 mA, -10...0...+10 V
o Power supply:
         - COND-SGA-A: 1015...230 VAC / 018...24 VDC
         - COND-SGA-D: 018...24 VDC    
o Low-cost
o Enclosure: ABS case 0164 x 84 x 57 mm

MEASUREMENT TRANSMITTER FOR DC VOLTAGE AND CURRENT SIGNALS

Código: CONV-UI
Valorado con 0 de 5

Actualizado: 2024-01-04

Measurement transmitter designed to convert any not-normalised DC voltage or current signal into a normalised signal while providing galvanic insulation.
o Voltage or current input
o Galvanic isolation 2 kV RMS. 50 Hz during max. 60 s between input, output and power supply
o Selection of input and output ranges by jumpers behind the front plate
o Wide range of power supplies
o Rail DIN mounting
o Weight: 130 g
o Compliant with EMC EN  500082-2

JUNCTION BOXES FOR WEIGHING SYSTEMS

Código: JBOX
Valorado con 0 de 5

Actualizado: 2024-01-04

Junction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment.
o 4 or 6 inputs
o Connection in 4 or 6 wires
o Cabling of load cells and electronics by screw terminals
o Waterproof

WEIGHING INDICATOR

Código: INDI-5250
Valorado con 0 de 5

Actualizado: 2024-01-04

Very-high-accuracy digital indicator designed for weighing applications.
o Approved for 10.000 d OIML
o Up to 70 measurements per second
o Alibi-memory for 10.000 records
o Parallel connection of up to 10 strain-gauge load cells (350 ohms)
o Display resolution up to 99.000 d
o Bright, 6-digit, red LED display (014 mm)
o Serial RS-232 port for connection to serial printer, computer or remote display
o Desktop or industrial housing
o 1 digital input (programmable as tilt input or to tare scale remotely or others)
o 2 digital outputs (programmable as weight set-points or as other control outputs)
AVAILABLE OPTIONS- analogue output 4(0)...020 mA or 0.002...10 V

HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS

Código: INDI-PSD
Valorado con 0 de 5

Actualizado: 2024-01-04

The INDI-PSD are hand-held indicators for load cells, force transducers or torque meters based on strain-gauge technology.
o 7 digit LCD display
o High resolution
o Light (250 g)
o Dual range
o Large autonomy (450 h in power save mode)
o TEDS enabled
o RS-232 output (INDI-PSD232 only)
AVAILABLE OPTIONS- CASE-PSD: leather case with shoulder strap and clear viewing 
- BATT-PSD: rechargeable batteries with charging unit (230 VAC)

RADIO TRANSMITTERS FOR ANALOGUE SIGNAL

Código: WI-T24TR-ACM
Valorado con 0 de 5

Actualizado: 2024-01-04

The WI-T24TR-ACM is a wireless radio transmitter for analogue measurement signals. It is available in 3 housing versions and for 3 kinds of input signals (mV/V, V and mA).
o Frequency: 2.4 GHz
o Power: 10 mW (licence: exemption)
o Range: 800 m (exception for WI-T24TR-ACMM: 500 m)
o High accuracy, high resolution
o Type:
            - WI-T24TR-ACM:
                  - housing: 0164x84x57 mm, protection class IP67
                  - power supply: from 5 to 018 VDC or 2 x D cells (2 x 1.5 VDC)
                  - autonomy: with 2 alkaline 10 Ah cells: 280 days**
            - WI-T24TR-ACMI:
                 - housing: 80x62x34 mm, protection class IP67
                 - power supply: 2 x AA cells (2 x 1.5 VDC)
                 - autonomy with 2 alkaline 2.2 Ah cells: 60 days**
            - WI-T24TR-ACMM:
                 - housing: 76x35x020 mm, protection class IP50
                 - power supply: 2 x AAA cells (2 x 1.5 VDC)
                   see option WI-T24TR-ACMM-BATT on tehcnical drawings
                 - autonomy with 2 alkaline 1 Ah cells: 28 days**
o Antenna: integrated