Series 160 Stainless Steel Pitot Tube
Actualizado: 2024-02-17
The Series 160 Stainless Steel Pitot Tube is constructed from corrosion resistant stainless steel with permanently etched insertion depth graduations for a lifetime of service. The static pressure port is parallel to the sensing tube to allow quick, easy alignment of the tube with air flow. A universal model fits the user supplied 3/4\" schedule 40 pipe in any length.
Model 166T Telescoping Stainless Steel Pitot Tube
Actualizado: 2024-02-17
The Model 166T Telescoping Pitot Tube is a unique air flow sensor which can quickly and easily be adjusted for any duct insertion length from 11.5 to 36 inches (29.2 to 91.4 cm). Now, this single compact unit can replace up to five conventional fixed length Pitot tubes. For even greater convenience, it is securely protected by a custom fitted polyethylene carrying case. Telescoping sections lock in place as they are extended, enabling use of the handle grip to gage proper alignment of the tip within the airstream. Stainless steel construction resists corrosion. Hemispherical tip has 1.0 flow coefficient, is 1/8\" dia. (3.2 mm). Largest section is 3/8\" (9.5 mm). Weight (with case) 1 lb, 9 oz (7009 g). Case: 12.5 x 6.25 x 1.75 in.
Series 160E Ellipsoidal Tip Pitot Tube
Actualizado: 2024-02-17
The Series 160E Ellipsoidal Tip Pitot Tube uses a precision crafted tip configuration, which allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Sliding depth indicators grip firmly to ensure uniform insertion when measuring traverses across ducts. Total and static pressure taps are 1/4\" (6 mm) and are permanently silver soldered to the connection block, making them leak-proof and durable.
Series 160S «S» Type Stainless Steel Pitot Tube
Actualizado: 2024-02-17
The Series 160S \"S\" Type Stainless Steel Pitot Tube is designed specifically for flow measurement of dirty, particulate laden air or gas streams typical in smoke stack and other environmental testing. Total and static pressure tubes are precisely aligned and welded together every 6 inches for maximum accuracy, strength, and long term durability. Permanent mount (PM) models include a 1\" welded stainless steel sleeve and adjustable compression fitting with 1\" MNPT mounting threads.
Series 160F Straight Stainless Steel Pitot Tubes
Actualizado: 2024-02-17
The Series 160F Straight Stainless Steel Pitot Tube is constructed from corrosionresistant stainless steel with permanently etched insertion depth graduations for a
lifetime of service. The static pressure port is parallel to the sensing tube to allow
quick, easy alignment of the tube with air flow. The straight design allows for easy
insertion into ducts through grills and pressure taps, as well as aids in positioning in
hard to reach locations where a hook style Pitot tube may not allow access.
Model 670 Fume Hood Monitor
Actualizado: 2024-02-17
The Model 670 Fume Hood Monitor continuously senses air flow through the face of the fume hood, ensuring safe levels of fresh air are exhausting. The 670 provides a highly accurate hot wire sensor to detect very low flows common on fume hoods. The Model 670 comes with everything required to quickly install the unit including a mounting bracket, 24\" of tubing for connecting to the inside of the hood wall and a 120 Volt AC power adapter.
Series HS Humidity Switch
Actualizado: 2024-01-18
The Series HS Humidity Switch provides control for humidifying or dehumidifying systems. Relative humidity, output status, and error messaging can be viewed on the bright green LED. Access to programming parameters can be locked for security purposes using the password protection feature.
Series THC Temperature/Humidity Switch
Actualizado: 2024-01-18
The Series THC Temperature/Humidity Switch simultaneously measures and controls temperature and humidity. The unit offers a 3-digit red display for temperatureindication and a 3-digit green display indicating humidity. The Series THC is equipped with four independent relays, two for temperature control and two relays for humidity control.
Series 657 Relative Humidity/Temperature Transmitter
Actualizado: 2024-01-18
The Series 657 Relative Humidity/Temperature Transmitters provide two4-20 mA channels to produce separate output signals for both relative humidity
and temperature. These devices deliver ±2% accuracy for humidity and ±1°F for
temperature measurements. Stainless steel probe can be easily mounted to most
ductwork using either of the two optional kits below.
Series RH-R Humidity/Temperature Transmitter
Actualizado: 2024-01-18
The Series RH-R Humidity Transmitter is the ideal transmitter for those applications where space is limited. The compact sensor is protected by a removable filter. It can be mounted up to 16 feet away from the weatherproof base. The Series RH-R is ideal for environmental chambers, rubber bladder burst detection and air handler applications.
Series RHP Humidity/Temperature Transmitter
Actualizado: 2024-01-18
The Series RHP Humidity and Temperature Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Featuring polymer capacitance humidity sensors, models are available in 2%, 3% or 5% accuracies. Duct mounted transmitters are available with an optional two-line alpha numeric LCD display.
Series WHT Weather-Resistant Humidity/Temperature Transmitter
Actualizado: 2024-01-18
The compact Series WHT Humidity/Temperature Transmitter is designed to withstand the elements. A removable sintered filter protects the polymer capacitance sensor from solid objects that may come in contact with the transmitter. The transmitter is available with 4 to 20 mA or 0 to 10 VDC output signals for both temperature and humidity. This transmitter is ideal for measuring outside air temperature and humidity levels for air handling economizer applications.
