CYLINDER
Actualizado: 2024-01-05
HYDRAULIC CYLINDER(UHD, UHSZ 100/ 0160, UHSZ 250) In accordance with the currently valid ISO and DIN regulations.
In addition, we furnish cylinders up to 250 bar. In line with customer requirements, we also develop special cylinders according to individual specifications.
All cylinder versions can be produced as servo actuator with/without an integrated position measuring system.
Specially developed are Universal Hydraulik-designed clamping cylinders which operate as a replacement for mechanical mushroom-headed anchor screws. The hydraulic’s easily-operated sealing/closing elements are used mainly in the chemical industry.
We have also been using cylinders for HPLC columns with internal anti-turning safety devices and integrated position-measuring system for some years.
VANE PUMPS
Actualizado: 2024-01-05
FOR MORE THAN THIRTY YEARS, UNIVERSAL HYDRAULIK IS THE EUROPEAN-DISTRIBUTOR OF RACINE/ BOSCH REXROTH PRODUCTS.Universal Hydraulik have been the distributor for RACINE / BOSCH products throughout Europe for the last ten years. This includes, for example, self-controlling vane pumps (up to 210 bar) types
This type of pump, first developed by Racine in 1925 (since 1988 by BOSCH / RACINE), has been further developed and continues to set new standards worldwide.
Other RACINE / BOSCH types: gear pumps, radial and axial piston pumps
ELECTRICAL OIL PRE-HEATER
Actualizado: 2024-01-05
Our EDH-Series Electrical Oil Pre-HeaterStandard Version
Heating capacity up to 90 kW
Thermostat: Adjustable 0-90°C (except EDH-500)
Temperature limiter: 100°C fixed (except EDH-500)
Max. operating pressure 016 bar
Surface loading 2W/cm²
Voltage: 3 x 400V
Material of housing: St-37
Material of heating elements: Stainless Steel 1.4541 (AISI 321)
Optional
Thermostat and Temperature limiter: Temperature range up to ca. 220°C
Operating pressures over 016 bar realizable on request
Surface loading: 1 W/cm² (recommended when media has a viscosity from 1000 cSt
Voltage: 3 x 690 V (other voltages available on request)
Temperature control
Customized solutions
SCREWED PLATE HEAT EXCHANGER
Actualizado: 2024-01-05
TL – SCREWED PLATE HEAT EXCHANGERDespite the fact that the screwed plate heat exchanger produce high-pressure loss, they are still found in many applications.
Standard version
Screwed plate heat exchanger
Modular system, thus great flexibility, subsequent adjustment possible by changing number of plates
Easy to clean
Optional
Various plate materials (titan, Hastelloy, etc.)
Module welded plates
Variable depths of stamping
Increased thickness
EQUIPMENT
Actualizado: 2024-01-05
TR-012 K TEMPERATURE CAPILLARY PIPE CONTROLLERSDescription
The temperature capillary pipe controller TR 012 operates on the principle of fluid expansion. A change in the temperature in the sensor effects a change in volume. This force, in turn, operates a floating changeover contact via a diaphragm. The required switching temperatures can be set separately over a range of between 0 - 012008C. The equipment is supplied on request with an actual temperature display. The sensors are located in an immersion pipe. The cables are connected via connecting terminals 1,5 mm². Also on request, the equipment can be supplied with gold contacts.
Technical specifications:
Switch housing: ABS with clear view cover
Type of protection: IP 65
Electrical connection: Cable screw connection Pg 11
Connecting terminal strip 1,5 mm2
Sensor sleeve: Brass
Operating pressure: 016 bar max.
Ambient temperature: -40 bis +80°C
Temperature display: 0-100°C ±2%
Temperature relays: 250V~, 10A
Temperature range: 0-0120°C
Operational accuracy: 5k
Differential gap: ~5k
OIL-AIR COOLERS (MOBILE APPLICATIONS)
Actualizado: 2024-01-05
YOU MOVE, WE COOLHydraulic as part of mobile applications are often required. You will find our hydraulic as part of mobile oil/air coolers, municipal vehicles, concrete mixers and construction/agriculture machines.
LKM - Mobile Oil Air Coolers
Standard Version
Drive: 012 V-, 24 V- Motor
Basis LKM Series
individual designs of sizes and drives
Optional
Pressure test 40 bar
Filter mat
Thermo-By-pass
Pressure-By-pass
Thermal switch
Stainless Steel
Drive: 012 V-, 24 V- Motor
Two or More electric motors
Cooling capacity may be tested
PARTIAL-FLOW-COOLING UNIT
Actualizado: 2024-01-05
OIL COOLING FOR SMALL SPACEPartial-flow-cooling Units exist in many different models and are individually adjustable.
Standard version
Partial-flow-cooling unit
Optional
Test pressure 40 bar
Filter mat
Ceiling, wall, - floor-mounting position
Thermo by-pass
Thermal Switch
Stainless Steel
OIL AIR HEAT EXCHANGER SERIES
Actualizado: 2024-01-05
OUR TASK IS 100% QUALITYEvery oil air cooler passes several test stands before delivery to keep cost-intensive quality defects to a minimum.
Customized Design
Jedes Kühlpaket unserer Luftwärmetauscher Serie LKI ist mit einem Thermo- & Druck-Bypass ausgestattet und kann bei jeder Bestellung individuell nach Ihren Wünschen und Projekten eingestellt werden.
LKI – Luftwärmetauscher
Standard version
Elektric motor
Optional
Test pressure 40 bar
Filter Mat
Ceiling, wall, floor mounting position
Thermo by-pass
Pressure by-pass
Thermal switch
Atex certification (II 2GD IIC T4 X) according to 94/9/EG
Stainless steel
OIL AIR HEAT EXCHANGER
Actualizado: 2024-01-05
OIL AIR HEAT EXCHANGER (INDUSTRY AND MOBILE)Universal Hydraulik Luftwärmetauscher
Our task is 100% quality
Every oil air cooler passes several test stands before delivery to keep cost-intensive quality defects to a minimum.
LKI – Oil air cooler
Standard version
Elektric motor
Optional
Test pressure 40 bar
Filter Mat
Ceiling, wall, floor mounting position
Thermo by-pass
Pressure by-pass
Thermal switch
Atex certification (II 2GD IIC T4 X) according to 94/9/EG
Stainless steel
