INTRIAL S.A.C, Empresa especializada empresa especializada en el suministro de instrumentos de medición para aplicaciones industriales.
Distribuidor de «GPI-METERS».
113435 10 conditioned signal output add on modules
Actualizado: 2024-03-07
Features & BenefitsFOR SERIES G2 METERS WITH NO BACKPLATE ONLY ONLYThis module replaces the local computer display on the Series G2, A1 and TM meters and provides an unscaled, amplified, digital signal capable of transmission up to 5,000 ft. (Does not include display or meter body)No conditioning or amplification needed Requires external 9-35VDC power source; provides open collector signal output Signal Type: Open Collector (NPN); Frequency: 0 to 750 Hz; Cable: 10 ft. (3 m) Belden #9363; Connector: Hubble PG7; Power: External 9 to 35 VDC, approximately 1 mA; Connection: 3-Wire
Note: Adding this module to an agency-approved meter will eliminate any agency approvals.
-40°F to 212°F (-40°C to 100°C)
125100 1 g2 add on transmitter modules
Actualizado: 2024-03-07
Features & BenefitsFOR THE OLDER G2 09 COMPUTER DISPLAYS ONLY. 4-20mA Module affixes to the back of the G2 Series meters to provide a connection to a wide variety of chart recorders, display equipment, and process control equipment Kit consists of a circuit, assembly, enclosure, and screws. (Does not include Diplay or Meter Body)Note that this unit is not FM ApprovedNote: We do not support this product outside the U.S. Signal Type: Analog; Voltage: 7 to 30 VDC; Strain Relief: Hubble PG7; Cable: 10 ft. (3m) Belden #9363; Loop Powered
14°F to 140°F (-10°C to 60°C)
125100 10 4 20ma output transmitter module
Actualizado: 2024-03-07
Features & Benefits4-20mA signal provides a connection to a wide variety of chart recorders, display equipment, and process control equipment. Also provides external power to display electronics.
The 4-20mA module (black with cable) mounts between the meter body and display
(Display and meter body not included)
Note: Adding this module to an agency-approved meter will eliminate any agency approvals.
Fits only newer metal body meters with Q9 computers (not R9 or 09 computers). G2 bodies must not have a backplate except for PVDF bodies.
Signal Type: 4-20mA / Open Collector (NPN); Power: 4-20mA Loop Powered 8 to 36 VDC, Open Collector (NPN) 8 to 26VDC; Strain Relief: Hubble PG7; Cable: 10 ft. (3m) Belden #9363
0°F to 140°F (-18°C to 60°C)
gg500 m remote display pulse out
Actualizado: 2024-03-07
Features & BenefitsRemote mount Pulse Out Transmitter with battery powered display Works with the G, G2, and OM Series Flowmeters. (OM meters require factory installation only. G2 meters require 510 Adapter, please contact us.)Flow rate and totals in GPM 9V Battery not included; Can rotate 180° Horizontally and 90° VerticallyAccuracy: ±0.1% of reading; Primary Output: Open Collector (NPN); Pulse Out : Max. \"OFF\" Voltage: 60V Max. \"ON\" Current: 200 mA Max. \"ON\" Voltage Drop: < 0.5 V @ 200 mA; Electrical: Strain Relief: Hubble PG7 Strain Relief Thread: Female 1/2-20 UNF-2B Remote: Belden 9363 (500 Series only) Cable Length: 20 ft. (6 m) provided (500 Series only); Power Supply: 9-volt battery or externally powered Voltage Supply (Min.): 7 VDC Voltage Supply (Max.): 30 VDC; Input Options: Hall Effect, Reed Switch, Open Collector or Low Level Sine Wave; Mounting: On pipe or wall; Frequency: Low Level Coil (LLC): 0 - 1000 Hz High Level Low Freq.: 0 - 150 Hz High Level High Freq.: 0 - 1000 Hz; Enclosure Rating: NEMA 4X / IP55; Calibratable by K-Factory Entry
14°F to 140°F (-10°C to 60°C)
sc500 remote scaled pulse signal output
Actualizado: 2024-03-07
Features & BenefitsRemote mount Switch-programmable multi-stage counter/divider with multiple inputs The module provides selectable K-factor to convert input frequency to scaled pulse output. It connects via a 20 foot input cable. Works with the G, G2, and OM Series Flowmeters. Can rotate 180° Horizontally and 90° VerticallyCable: 20 ft., 3-conductor, tinned drain wire, 22 AWG, PVC jacket .212 dia. Ref. Belden 9363; Accuracy: ±0.1% of reading; Output: Open Collector (NPN); Power Supply: DC powered 5 to 30 VDC; Input Options: Hall Effect, Reed Switch, Open Collector (NPN) or Sine Wave; Mechanical Mounting Connections: Wall or pipe mountable with standard U-bolts (Series 500 Output); Frequency: Coil, HF = 0-1500 Hz; LF = 0-150 Hz; Electrical Connections: Two strain relief ports
-40°F to 185°F (-40°C to 85°C)
eb11 easybatch dual stage dc batch controller
Actualizado: 2024-03-07
Features & Benefits12 mm 7-digit batch total and 7 mm 7-digit batch presetPlease contact us with exact application before ordering to determine if PN RT406D0MM is required for local meter mount or PN RT406D0FM is required for remote field mount.Additional parts may be required.Inquire for assembly charges.
Field Mount: -10°C to +60°C (14°F to +140°F)
10001386 01 batch controller g2 accessories
Actualizado: 2024-03-07
Features & BenefitsFor Remote and Panel Mount, Safe Area OnlyDisplays Batch, Rate, and Grand Total Full numerical keypad, 2x mechanical relay outputs, 115-230VAC powered, backlight, DIN43700/IEC61554 panel mount enclosure. See Catalog Page link on leftFormer PN 10001386-01
-4°F to 140°F (-20°C to 60°C)
113520 1 lithium battery kit
Actualizado: 2024-03-07
Features & BenefitsFor A1, G2, TM Series meters that have the older 09 Computer Display
These batteries do not work in the new Q9 Computer Displays (Q9 Computer Displays require AAA Alkaline batteries)
Kit consists of (2) 3V Lithium Batteries
5 Year Life
PN 902004-02 is the same battery kit
902004 02 lithium battery kit
Actualizado: 2024-03-07
Features & BenefitsFor A1, G2, TM Series meters that have the older 09 Computer DisplayThese batteries do not work in the new Q9 Computer Displays (Q9 Computer Displays require AAA Alkaline batteries)Kit consists of (2) 3V Lithium Batteries PN 113520-1 is the same battery kit
