Edgetech PDM75-X3 Hygrometer
Actualizado: 2024-01-17
The Edgetech PDM75-X3 Hygrometer features drift-free accuracy, NIST traceability, low maintenance, high durability and ease ofuse in a portable package, resulting in a system ideally suited for the demands of field use. The Model PDM75-X3 has all the
standard features Edgetech Instruments DewMaster Hygrometer in a portable package, with a modular chilled mirror sensor that is
chemically resistant to background gases, configured to meet your dew/frost point measurement requirements.
Fuji Electric ZKME Oxygen Analyzer
Actualizado: 2024-01-17
The Fuji Electric ZKME oxygen analyzer is for use in hazardous locations. ZKME analyzers utilize zirconium oxide sensing technology to continuously measure the oxygen concentration in combustion exhaust gases of industrial boilers and furnaces. The ZKME is ideally suited for combustion management and control. Consisting of the signal processor, input/output and communications, display and system controls, the ZKME requires ZFKE sensors (and cable) to complete the system.
Druck DPI 611 Pressure Calibrator
Actualizado: 2024-01-17
The Druck DPI 611 is a fully self-contained pressure test and calibration system which combines pressure generation, signal measurement and loop power to provide all the convenience necessary to be an \"everyday\" tool for maintaining and calibrating pressure instruments. The DPI 611 is the fourth generation in the DPI 600 family, and is the successor to the popular Druck DPI 610/615 but is only half the size of its predecessor while being twice as accurate and easier to use.
Flo-tech MC4000 Hydraulic System Analyzer
Actualizado: 2024-01-17
The Flo-tech MC4000 hydraulic system analyzer is a handheld instrument that combines a turbine flow meter with inputs for two pressure sensors, onetemperature sensor, and one active pick-up for RPM measurements. The versatility of the MC4000 makes it the ideal instrument for fast diagnostic
troubleshooting of all types of mobile or stationary hydraulic systems and components.
Bently Nevada 177230 Seismic Transmitter
Actualizado: 2024-01-02
The Bently Nevada 177230 Seismic Transmitter provides a 4-20 mA signal proportional to the 0-1 inch/sec 0-pk velocity movement of a rollerelement bearing housing or machinery housing. It is designed for use on non-critical machines. The transmitter automatically integrates the
acceleration signal on the machine to vibration prior to sending the signal to the controller. The Seismic Transmitter also has a dynamic
acceleration waveform output for advanced diagnostics that is accessible at the non-sensor end of the field wiring through either a patch
panel or some other wiring technique.
Bently Nevada 3500/22M Data Interface Module
Actualizado: 2024-01-02
Bently Nevada 3500/22M Data Interface Module is the interface between the 3500 monitoring system and compatiblesoftware (System 1* Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI
combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication
processor such as TDXnet.
Bently Nevada Ranger Pro Vibration Sensor
Actualizado: 2024-01-02
Bently Nevada Ranger Pro Vibration Sensor is a wireless vibration sensor package used by plant managers and operators in the oil & gas, power generation and industrial markets. The Ranger Pro enables plant operators to optimize the reliability of low- and medium-criticality machines.Bently Nevada 3500/46M Hydro Monitor
Actualizado: 2024-01-02
The Bently Nevada 3500/46M Hydro Monitor is a four-channel instrument that accepts input from proximity, seismic and air gap sensors. Themonitor conditions the signal to provide vibration as well as position measurements and compares the conditioned signals with user-programmable
alarms. Hydro Radial Vibration channels combine the shaft gap movement with the NX amplitude to provide a measurement to alarm on shear-pin
failure.
Wilcoxon Sensing Technologies 797 High Performance Accelerometer
Actualizado: 2024-01-02
The Wilcoxon Sensing Technologies 797 high performance accelerometer is designed for long-term, reliable use. It is constructed with 316L stainless steel, and is hermetically sealed. It features a 1/4-28 captive socket head with 0.0062\" diameter safety wire hole for mounting, and has a MIL-C-50015 2-pin output connector. The 797 is case isolated, and has 100mV/g sensitivity and ±5% sensitivity tolerance.FLIR SV87-KIT Vibration Monitoring System
Actualizado: 2024-01-02
The FLIR SV87-KIT is a wireless connected sensing-solution designed for continuous vibration and temperature monitoring. Vibration trending and analysis can help detect serious problemswith industrial machines long before the damage can be seen, making the SV87-KIT ideal for manufacturing environments that use rotating machinery, industrial pumps, fans, gearboxes, and
motors. The included remote monitoring gateway stores sensor data and wirelessly transmits readings in real-time to a mobile device or PC. This allows professionals to make knowledgeable
decisions about machine operation and maintenance without having to wait for the next manual inspection – reducing unplanned downtime, lowering operational costs, and improving profitability.
