Bently Nevada 177230 Seismic Transmitter
Actualizado: 2024-01-17
The Bently Nevada 177230 Seismic Transmitter provides a 4-20 mA signal proportional to the 0-1 inch/sec 0-pk velocity movement of a rollerelement bearing housing or machinery housing. It is designed for use on non-critical machines. The transmitter automatically integrates the
acceleration signal on the machine to vibration prior to sending the signal to the controller. The Seismic Transmitter also has a dynamic
acceleration waveform output for advanced diagnostics that is accessible at the non-sensor end of the field wiring through either a patch
panel or some other wiring technique.
Bently Nevada 3500/22M Data Interface Module
Actualizado: 2024-01-17
Bently Nevada 3500/22M Data Interface Module is the interface between the 3500 monitoring system and compatiblesoftware (System 1* Condition Monitoring and Diagnostic software and 3500 System Configuration software). The TDI
combines the function of a 3500/20 Rack Interface Module (RIM) with the data collection capability of a communication
processor such as TDXnet.
Bently Nevada Ranger Pro Vibration Sensor
Actualizado: 2024-01-17
Bently Nevada Ranger Pro Vibration Sensor is a wireless vibration sensor package used by plant managers and operators in the oil & gas, power generation and industrial markets. The Ranger Pro enables plant operators to optimize the reliability of low- and medium-criticality machines.
Bently Nevada 3500/46M Hydro Monitor
Actualizado: 2024-01-17
The Bently Nevada 3500/46M Hydro Monitor is a four-channel instrument that accepts input from proximity, seismic and air gap sensors. Themonitor conditions the signal to provide vibration as well as position measurements and compares the conditioned signals with user-programmable
alarms. Hydro Radial Vibration channels combine the shaft gap movement with the NX amplitude to provide a measurement to alarm on shear-pin
failure.
Wilcoxon Sensing Technologies 797 High Performance Accelerometer
Actualizado: 2024-01-17
The Wilcoxon Sensing Technologies 797 high performance accelerometer is designed for long-term, reliable use. It is constructed with 316L stainless steel, and is hermetically sealed. It features a 1/4-28 captive socket head with 0.0062\" diameter safety wire hole for mounting, and has a MIL-C-50015 2-pin output connector. The 797 is case isolated, and has 100mV/g sensitivity and ±5% sensitivity tolerance.
FLIR SV87-KIT Vibration Monitoring System
Actualizado: 2024-01-17
The FLIR SV87-KIT is a wireless connected sensing-solution designed for continuous vibration and temperature monitoring. Vibration trending and analysis can help detect serious problemswith industrial machines long before the damage can be seen, making the SV87-KIT ideal for manufacturing environments that use rotating machinery, industrial pumps, fans, gearboxes, and
motors. The included remote monitoring gateway stores sensor data and wirelessly transmits readings in real-time to a mobile device or PC. This allows professionals to make knowledgeable
decisions about machine operation and maintenance without having to wait for the next manual inspection reducing unplanned downtime, lowering operational costs, and improving profitability.
Bently Nevada 3300 XL Proximity Probe
Actualizado: 2024-01-17
The Bently Nevada 3300 XL Proximity Probe delivers the most advanced performance in the eddy current proximity transducer systems. The standard 3300 XL 8mm 5-metre system also fully complies with the American Petroleum Institute\'s (API) 670 Standard (4th Edition) for mechanical configuration, linear range, accuracy, and temperature stability. All 3300 XL 8mm proximity transducer systems provide this level of performance and support complete interchangeability of probes, extension cables, and Proximitor sensors, eliminating the need to match or bench calibrate individual components.
Wilcoxon Sensing Technologies MAC800 Series Handheld Vibration Meter Kit
Actualizado: 2024-01-17
The Wilcoxon Sensing Technologies MAC800 series handheld vibration meter kit is designed to enable users to take vibration measurements from pumps, motors, fans, and bearings. The MAC800 displays overall vibration in velocity or displacement with 3 frequency bands based on running speed and 200/800 line spectrum. The kit supports up to ten machines at ten points each. The MAC800 comes with built-in band filters for unbalance, misalignment, and looseness, and its low frequency range allows readings on machinery running at speeds as slow as 120 RPM.
Wilcoxon Sensing Technologies 786F Series Accelerometer
Actualizado: 2024-01-17
The Wilcoxon Sensing Technologies 786F series accelerometer is designed for long-term, reliable use. It is constructed with 316L stainless steel and features a 1/4-28 UNF tapped hole for mounting with SF6 stud (included). It has either a J9T2A, 16-foot, blunt cut integral cable or integral shielded Class I, Div 2 suitable cable, depending on the model. The 786F is case isolated, and has a 100mV/g, ±5% sensitivity tolerance. The 786F is manufactured in an ISO 90001 facility.
Wilcoxon Sensing Technologies 793 General Purpose Accelerometer
Actualizado: 2024-01-17
The Wilcoxon Sensing Technologies 793 general purpose accelerometer is designed for long-term, reliable use. It is constructed with 316L stainless steel, and is hermetically sealed. It has a MIL-C-50015 style 2-pin output connector, a 1/4-28 tapped hole for mounting, and a R6 type connector. The 793 is case isolated, and has 100mV/g sensitivity and ±5% sensitivity tolerance.
