Flomec GPI GSCPS Series Turbine Flow Meter
Actualizado: 2024-01-18
The precision GPI GSCPS Series turbine flow meter offers outstanding accuracy and reliability. With ruggedstainless steel body the GPI GSCPS Series turbine flow meter is compatible with most chemicals and will stand
up well to high pressure applications. With an increased temperature rating (-100 to 225°F) and utilizing a
Tri-Clover® sanitary clamp connection, the GSCPS is an excellent choice for food and beverage applications that
require high accuracy with strict 3-A Approval. The internals of this meter are machined or polished to meet
3-A self-draining and cleaning requirements (Ra 32as well as Clean in Place (CIP), Steam in Place (SIP) and Clean
Out of Place (COP) requirements.
Badger Meter Series 228 Flow Sensors
Actualizado: 2024-01-18
The Badger Meter Series 228 flow sensors feature a six-bladed impeller design with a proprietary non-magnetic sensing mechanism.The forward-swept impeller shape provides higher, more consistent torque than four-bladed impeller designs and is less prone to be
fouled by waterborne debris. The forward-curved shape, coupled with the absence of magnetic drag, provides improved operation and repeatability,
even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes.
As the liquid flow turns the impeller, a low impedance square wave signal is transmitted with a frequency proportional to the flow rate.
The signal can travel up to 2000 feet between the flow sensor and the display unit without the need for amplification.
Badger Meter Series 735 Flow Sensors
Actualizado: 2024-01-18
The Badger Meter Series 735 flow sensors utilize paddlewheel technology to provide accurate metering on flow velocitiesfrom 2 to 20 ft/second. Featuring a four bladed, non-fouling impeller, the 735 incorporates non-magnetic sensing
technology which reduces drag and can detect quick changes in flow rates while providing for a wide measurement range.
TruFlo ProPulse Series Turbine Flow Meter
Actualizado: 2024-01-18
The TruFlo ProPulse series turbine flow meters consist of one universal body that can be customized into five selectable flowranges. Changing from one flow range to another is achieved by inserting a very precise flow jet. The flow ranges are as low
as 0.005 to 0.50 lpm (0.0013 to 0.132) and as high as 0.50 to 15.0pm (0.132 to 3.963 gpm). The ProPulse has an accuracy of ±1% full scale
and a repeatability of ±0.1%.
Flomec GPI 001N Series Water Meter
Actualizado: 2024-01-18
The simple, small, and sturdy GPI 001N Series water meter is constructed with rugged nylon housing. The in-line design of the GPI 001N Series water meter permits mounting on the end of a hose or pipe. The GPI 001N Series water meter ships as a complete meter, including turbine assembly, microprocessor, and LCD readout. Gallon and liter measurement are available.
Badger Meter Series 250 Flow Sensors
Actualizado: 2024-01-18
The Badger Meter Series 250 Flow Sensors feature a closed, six-bladed impeller design with a non-magnetic sensing mechanism.The mechanism is mounted in a cast bronze housing with female NPT threads. The unique impeller design is less prone to be fouled
by waterborne debris. The forward-curved shape coupled with the absence of magnetic drag provides improved operation and repeatability
even at lower flow rates. This is especially true where the impeller is exposed to metallic or rust particles found in steel or iron pipes.
Blancett 900 Series Positive Displacement Flow Meter
Actualizado: 2024-01-18
The Blancett 900 Series Positive Displacement Flow Meter are designed specifically for the measurement of floodwater line flow insecondary oil recovery operations. Using a time-proven rotary vane mechanism, the 900 Series flow meters provide reliable long-term
measurement and totalization with minimum attention and maintenance.
AW-Lake FlowStat Sensors
Actualizado: 2024-01-18
The AW-Lake FlowStat sensors are available with either a stainless steel or polypropylene body, depending on your flow monitoring needs. Both units feature an accuracy of ±2% of full-scale and a repeatability of ±0.5% of full-scale. For additional compatibility, the AW-Lake FlowStat sensors offer 4-20 mA, 0-5 VDC, pulse or relay outputs.
Seametrics WT Series Turbine Flow Meter
Actualizado: 2024-01-18
The unique Seametrics WT Series turbine flow meter electronically detects and processes rotation of the rotor and is available in sizes from 3 to 8 inches.Because the only moving part is a precision helical rotor, the WT Series is optimized for low-flow.
In addition, accuracy is maximized by these in-line, individually-calibrated turbine flow meters.
Blancett 1100 Turbine Flow Meter
Actualizado: 2024-01-17
The Blancett 1100 turbine flow meter is designed to withstand the demands of the most rigorous flow measurement applications. It features a rugged 316 stainless steel housing and rotor support assemblies, CD4MCU stainless steel rotor, and abrasive-resistant tungsten carbide rotor shaft and journal bearings.
GF Signet 2537 Paddlewheel Flow Meter
Actualizado: 2024-01-17
The GF Signet 2537 paddlewheel flow meter is the next generation in fluid measurement technology from the inventor of the original paddlewheel flow meter. The 2537 flow meter is an improvement on the industry standard. It has the added functionality of various output options including flow switch, multi-functional pulse divider, digital (S³L), or 4 to 20mA. Additionally, the GF Signet 2537 paddlewheel flow meter offers low flow, low power, and high resolution and can be configured onsite directly through the built-in user interface.
Flomec GPI TM Series Water Meter with Q9 Display
Actualizado: 2024-01-17
GPI TM Series Water Meters indicate batch, cumulative totals, and rate of flow measured in gallons, litres or cubic feet. They are easy to install with Spigot, NPT, BSP, 150# ANSI flange, or DIN flange fittings. The alkaline battery lasts for two years, and the non-volatile totals mean amounts are retained when batteries are replaced or power is lost. TM Series meters are available with either a computer for local electronic display, or one of three versions of output modules to provide a digital signal to customer interfacing equipment.
