Greyline Instruments DFS 5.1 Doppler Flow Switch
Actualizado: 2024-01-17
The Greyline Instruments by Pulsar DFS 5.1 Doppler flow switch provides accurate flow control from outside of the pipe. Recommended for difficult liquidsincluding wastewater, cooling water, slurries, sludge, chemicals, viscous liquids and abrasives, the DFS 5.1 is ideal for pump protection or to
activate flow/no-flow alarms.
Greyline Instruments PDFM 5.1 Doppler Flow Meter
Actualizado: 2024-01-17
The Greyline Instruments, by Pulsar Measurement, PDFM 5.1 doppler flow meter is fast and easy to operate making it ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The non-contact sensor quickly attaches to the outside of a pipe while the built-in keypad and calibration menu let you set up the instrument in minutes. Use the PDFM 5.1 for projects where a permanent flowmeter is not required or to temporarily replace installed flow transmitters.
Panametrics DigitalFlow DF868 Ultrasonic Flow Meter
Actualizado: 2024-01-17
The Panametrics DigitalFlow DF868 Ultrasonic Flow Meter is a full-featured, fixed-installation liquid flow meter designed to meet all your flow metering and energy measurement needs. Its patented Correlation Transit-Time digital signal processing provides drift-free measurements in ultraclean and most \"dirty\" liquids. This includes fluids with gas bubbles and entrained solids that previously required Doppler-type meters.
Panametrics AquaTrans AT600 Ultrasonic Flow Meter
Actualizado: 2024-01-17
The Panametrics AquaTrans AT600 ultrasonic flow meter has no moving parts and requires minimal maintenance. An on-board microprocessor uses patented correlation transit-time technology for long-term, drift-free operation. Automatic adjustment to changing fluid properties and dynamically configured operating software simplifies programming.
Dynasonics TFX-5000 Ultrasonic Flow Meter
Actualizado: 2024-01-17
The Dynasonics TFX-5000 Ultrasonic Flow Meter measures volumetric flow and heating/cooling energy rates in clean liquids as well as those with small amounts of suspended solids or aeration, such as surface water or raw sewage. TFX-5000 flow and energy meters clamp onto the outside of pipes and do not contact the internal liquid. The TFX-5000 meter is available in a variety of configurations that permit the user to select a meter with features suitable to meet particular application requirements.
Greyline Instruments OCF 6.1 Open Channel Flow & Tank Level Meter
Actualizado: 2024-01-17
The Greyline Instruments, by Pulsar Measurement, OCF 6.1 open channel flow & tank level meter uses a non-contacting ultrasonic sensor mounted over a flume or weir to measure flow, or inside/above a tank to measure level. The separate, watertight electronics/display enclosure can be mounted within 500 ft (150 m) of the sensor. The OCF 6.1 continuously displays, totalizes, transmits, and data logs open channel flow or level.
E+H Proline Prosonic Flow B 200 Ultrasonic Flow Meter
Actualizado: 2024-01-17
The E+H Proline Prosonic Flow B 200 ultrasonic flow meter features accurate and reliable measurement of wet biogas and digester gas, even under fluctuating process conditions. The flow meter uses a measuring principle unaffected by gas composition. With its unique integrated real-time methane fraction analysis, the Prosonic Flow B 200 enables continuous measurement and monitoring of gas flow as well as gas quality.
Fuji Electric FSV Ultrasonic Flow Meter
Actualizado: 2024-01-17
The Fuji Electric FSV ultrasonic flow meter is the latest generation of high performance ultrasonic liquid flow meters using transit time technology. It is particularly effective in applications where high accuracy is required and the flow meter needs to be installed without shutting down the process. It is the perfect option for measuring flow rates of relatively clean, homogeneous liquids in closed, filled pipes.
E+H Proline Prosonic Flow 92F Ultrasonic Flow Meter
Actualizado: 2024-01-17
The E+H Proline Prosonic Flow 92F ultrasonic flow meter combines a loop-powered transmitter with an inline sensor in a rugged industrial design. The 92F is a calibrated meter suited for process control and utility measurement in the chemical and petrochemical industries, and it measures flow of conductive and especially non-conductive liquids such as solvents, hydrocarbons and non-conductive water. The meter features full bore design for no additional pressure loss.
