LARGE DIGITAL DISPLAYS
Código Interno:
Reference : DISP-FLarge digital displays for distance reading.DISP-Fx-yz x = input - P: process input: 0...10 V and 4(0)...20 mA - S2: RS-232 - S4: RS-485 y = Digits (4 or 6) z = Digits height: - DISP-Fx-y2: 57 mm - DISP-Fx-y4: 102 mm - DISP-Fx-y6: 150 mm - DISP-Fx-y8: 200 mm - DISP-Fx-y12: 300 mm - DISP-Fx-y16: 400 mm - other on request\"Technical drawings available on datasheet\"
MEASUREMENT TRANSMITTER FOR DC VOLTAGE AND CURRENT SIGNALS
Código Interno:
Reference : CONV-UIMeasurement transmitter designed to convert any not-normalised DC voltage or current signal into a normalised signal while providing galvanic insulation.o Voltage or current inputo Galvanic isolation 2 kV RMS. 50 Hz during max. 60 s between input, output and power supplyo Selection of input and output ranges by jumpers behind the front plateo Wide range of power supplieso Rail DIN mountingo Weight: 130 go Compliant with EMC EN 50082-2\"Technical drawings available on datasheet\"
STRAIN-GAUGE BRIDGE TO USB CONVERTER
Código Interno:
Reference : COND-USBThe COND-USB converts the signal from a Wheatstone bridge (mV/V) into a USB signal.o High accuracyo Very high resolutiono Linearisation of transducer signal availableo Toolkit software includedo ABS IP50 enclosureo DB9 socket @ load cell sideo Micro USB socket with 1.5 m cable\"Technical drawings available on datasheet\"
CONDITIONERS – AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCERS
Código Interno:
Reference : COND-SGAThe COND-SGA conditioners - amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on strain-gauge technology.o Input: Wheatstone bridge 0.1 to 30 mV/Vo Output: 4(0)...20 mA, -10...0...+10 Vo Power supply: - COND-SGA-A: 115...230 VAC / 18...24 VDC - COND-SGA-D: 18...24 VDC o Low-costo Enclosure: ABS case 164 x 84 x 57 mm\"Technical drawings available on datasheet\"
CONDITIONERS – AMPLIFIERS FOR STRAIN-GAUGE-BASED TRANSDUCERS
Código Interno:
Reference : COND-A420The COND-A420 conditioners - amplifiers provide standardised signals in current and voltage from every load cell, force transducer and torque sensor based on strain-gauge technology.o Input range: Wheatstone bridge (4 or 6 wires connection (sense))o Output: 4(0)...20 mA and 0...10 V (simultaneously)o Sensor excitation: 10 V (120 mA max.) available for up to 4 x 350 ohms. Load cells connected in parallelo DIN rail mounting\"Technical drawings available on datasheet\"
CRANE OVERLOAD PROTECTION ELECTRONICS FOR 4 CHANNELS + SUM
Código Interno:
Reference : CABIN-4xB1SUMDThe CABIN-4IB1SUMD and CABIN-4DB1SUMD are crane overload protection systems designed to manage 4 hoisting devices as well as the sum of the loads. x = input: - I: mV/V or - D: process input 4(0)...20 mAo Easy and intuitive calibrationo Display of hoisted loads and input signalso Internal monitoring system of load cell integrity and load limitation electronics (fail safe)\"Technical drawings available on datasheet\"
CRANE OVERLOAD PROTECTION ELECTRONICS FOR 2 CHANNELS + SUM
Código Interno:
Reference : CABIN-2xB1SUMDThe CABIN-2IB1SUMD and CABIN-2DB1SUMD are crane overload protection systems designed to manage 2 hoisting devices as well as the sum of the loads. x = input: - I: mV/V or - D: process input 4(0)...20 mAo Display of hoisted loads and input signalso Monitoring system of load cell integrity and electronics (fail safe)\"Technical drawings available on datasheet\"
EOT CRANE OVERLOAD PROTECTION ELECTRONICS WITH 1 OR 3 SET-POINTS
Código Interno:
Reference : BRIDGE-BOYElectronics with 1 or 3 set-points designed, in combination with a load cell, to limit the load and/or to detect slack cable on a hoisting device (EOT cranes). o Low cost o 1 or 3 independent set-pointso Set-points 1 and 2 configurated for load limitationo Set-point 3 configurated by default for slack cable detectiono Adjustments by potentiometerso Analogue outputs: 0...10 V and 4...20 mAo Din rail mounting (TS 35)o 115 VAC available by internal jumper\"Technical drawings available on datasheet\"
ECONOMICAL CUSTOM-MADE LOAD PINS
Código Interno:
Reference : 5600Custom-made load pins designed to be installed at the same place of a common axle without change to the existing mechanical environment. Economical version of model 5000. o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and liftso Useful diameter smaller than or equal to 39 mmo With axial cable glando Sturdy designo Material: stainless steelo Protection class: IP65o Cable length: 6 m (other lengths available on requestTechnical drawings available on datasheet
WIRE ROPE LOAD CELLS
Código Interno:
Reference : 5500-5505 Low cost load cells specially designed to measure the tension force on hoisting ropes.o CE certified for hoisting applicationso Easy installation directly without dismantling on the hoisting ropeo Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters: from 6 up to 46 mm)o Material: - 5500: stainless steel - 5505: nickel-plated steelo Protection class: IP65o Sturdy designo Reliable and economical solutiono Complete range of \"CE\" certified electronics and load limiters availableo Cable length: see drawing table - CL (other lengths available on request)Technical drawings available on datasheet
TENSION LINK LOAD CELLS
Código Interno:
Reference : 5200L-5205LTension link load cells specially designed for load limitation on hoisting devices.o Sturdy designo Breaking load > 500 %o CE certified for hoisting deviceso Protection class: IP66o Material: stainless steel (5200L), nickel-plated steel (5205L)o Easy to install (standard shackles) o Cable length: 0.5...5 t: 3 m (other lengths available on request) 10 t: 6 m (other lengths available on request)o Complete range of CE certified electronics and load limiters availableTechnical drawings available on datasheet
SUBSEA LOAD SHACKLES
Código Interno:
Reference : 5050MLoad measuring shackles designed to measure subsea tension forces. o CE certified for hoisting applications o Protection class: IP68 o Depth: up to -7500 m / -24 606 ft (750 bars / 11 000 psi) - deeper on request o Sturdy design o Material: stainless steel except shackle bow o Easy to install o Complete range of CE certified electronics, load limiters and display available o Cable length: 6 m (other lengths available on request)Technical drawings available on datasheet
