RADIO TRANSMITTERS FOR ANALOGUE SIGNAL
Código Interno:
Reference : WI-T24TR-ACMThe WI-T24TR-ACM is a wireless radio transmitter for analogue measurement signals. It is available in 3 housing versions and for 3 kinds of input signals (mV/V, V and mA).o Frequency: 2.4 GHzo Power: 10 mW (licence: exemption)o High accuracy, high resolutiono Type: - WI-T24TR-ACM: - housing: 164x84x57 mm, protection class IP67 - range: 800 m - power supply: from 5 to 18 VDC or 2 x D cells (2 x 1.5 VDC) - autonomy: with 2 alkaline 10 Ah cells: 280 days** - WI-T24TR-ACMI: - housing: 80x62x34 mm, protection class IP67 - range: 800 m - power supply: 2 x AA cells (2 x 1.5 VDC) - autonomy with 2 alkaline 2.2 Ah cells: 60 days** - WI-T24TR-ACMM: - housing: 76x35x20 mm, protection class IP50 - range: 500 m - power supply: 2 x AAA cells (2 x 1.5 VDC) - autonomy with 2 alkaline 1 Ah cells: 28 days**o Antenna: integrated\"Technical drawings available on datasheet\"
MULTICHANNEL WIRELESS RECEIVER WITH DIGITAL OUTPUT
Código Interno:
Reference : WI-T24RE-SOThe WI-T24RE-SO is a base station designed to connect up to 8 transducers provided by a wireless transmitter WI-T24TR-ACM-xA to a PC or a PLC. It achieves configuration, calibration and data acquisition of each one or all of them.o Frequency: 2.4 GHzo Power: 10 mWo License: exemptiono Range: up to 800 m open fieldo Antenna: integrated\"Technical drawings available on datasheet\"
WIRELESS RECEIVERS WITH DIGITAL OUTPUTS
Código Interno:
Reference : WI-T24RE-BSxWI-T24RE-BSU, -BSUE and -BSI are base stations designed to connect every transducer provided by a wireless transmitter (WI-T24TR-ACM-xA) to a PC or a PLC in order to achieve its configuration, calibration and data acquisition.o Frequency: 2.4 GHzo Power: 10 mWo Licence: exemptiono Range: up to 800 m open fieldo Antenna: integrated\"Technical drawings available on datasheet\"
WIRELESS ANALOGUE OUTPUT RECEIVER MODULES
Código Interno:
Reference : WI-T24RE-AO1WI-T24RE-AO1 and WI-T24RE-AO1I convert data from a WI-T24TR-ACM module into an analogue output.o Voltage and current outputo Frequency: 2.4 GHzo Licence: exemptiono Up to 2000 updates / so High accuracyo High resolutiono Industrial (WI-T24RE-AO1I) and desktop (WI-T24RE-AO1) versions available\"Technical drawings available on datasheet\"
SMART JUNCTION BOX MONITORING LOAD CELL INTEGRITY
Código Interno:
Reference : JBOX-LCISmart junction box is designed for parallel connecting of 2 to 4 load cells to an electronic device and for ensuring the monitoring of their correct functioning.o Control of: - load cell out of pre-set balance range - load cell out of pre-set operating range - low / high excitation - open circuit to any load cell on each connection - short circuit on any load cell connection - internal load cell fault (bridge imbalance)o Ensure the positive safety of load limitation systems based on multiple load cells connected in parallel (hoisting devices)\"Technical drawings available on datasheet\"AVAILABLE OPTIONS- ABS housing available with DIN rail mounting accessories- PCB available without ABS housing
JUNCTION BOXES FOR WEIGHING SYSTEMS
Código Interno:
Reference : JBOXJunction boxes designed to connect several load cells in parallel to the same electronics with corner adjustment.o 4 or 6 inputso Connection in 4 or 6 wireso Cabling of load cells and electronics by screw terminals o Waterproof\"Technical drawings available on datasheet\"
HAND-HELD DISPLAYS FOR STRAIN-GAUGE-BASED TRANSDUCERS
Código Interno:
Reference : INDI-PSDThe INDI-PSD are hand-held indicators for load cells, force transducers or torque meters based on strain-gauge technology.o 7 digit LCD displayo High resolutiono Light (250 g)o Dual rangeo Large autonomy (450 h in power save mode)o TEDS enabledo RS-232 output (INDI-PSD232 only)\"Technical drawings available on datasheet\"AVAILABLE OPTIONS- CASE-PSD: leather case with shoulder strap and clear viewing - BATT-PSD: rechargeable batteries with charging unit (230 VAC)
INDICATOR FOR STANDARD REFERENCE FORCE TRANSDUCERS
Código Interno:
Reference : INDI-ISO376The INDI-ISO376 is a very high-accuracy portable indicator designed to be used in combination with standard reference force transducers with accuracy classes 1, 0,5 or 00 according to ISO 376 standard.o High accuracy: 0.01% o High resolution o 6-wire connection\"Technical drawings available on datasheet\"AVAILABLE OPTIONS- acquisition and management software
WEIGHING INDICATOR
Código Interno:
eference : INDI-5250Very-high-accuracy digital indicator designed for weighing applications.o Approved for 10.000 d OIML o Up to 70 measurements per second o Alibi-memory for 10.000 records o Parallel connection of up to 10 strain-gauge load cells (350 ohms) o Display resolution up to 99.000 d o Bright, 6-digit, red LED display (14 mm) o Serial RS-232 port for connection to serial printer, computer or remote displayo Desktop or industrial housingo 1 digital input (programmable as tilt input or to tare scale remotely or others) o 2 digital outputs (programmable as weight set-points or as other control outputs)\"Technical drawings available on datasheet\"AVAILABLE OPTIONS- analogue output 4(0)...20 mA or 0.02...10 V
LOAD CELL INDICATOR FOR TESTING MACHINE CONTROL
Código Interno:
Reference : INDI-12390Standard reference indicator specially designed to display the 4 signals generated by the 3115F-12390 load cell. It is designed for the control of concrete testing machines according to EN12390-4 and DIN 51302-2 standards.- Compliant with EN 12390-4 and DIN 51302-2 standards- 4 independent displays- Resolution: 5 digits- Robust industrial housing- Digital output: RS-485\"Technical drawings available on datasheet\"AVAILABLE OPTIONSo analogue output: 0...10 V or 4...20 mA
DISPLAY FOR STANDARD REFERENCE FORCE TRANSDUCERS
Código Interno:
Reference : INDI-00The INDI-00 is a high-accuracy portable indicator designed to be used in combination with standard reference force transducers with accuracy classes 1, 0,5 and 00*** according to ISO 376 standard.o High accuracy: 0.01%o High resolution: 5 1/2 digitso 6-wire connectiono RS-232 output\"Technical drawings available on datasheet\"AVAILABLE OPTIONS- acquisition and management software- working with rechargeable battery (charger included)
DUAL INPUT DISPLAYS
Código Interno:
Reference : DISP-PAXDPDual independent process input meters.o A math function can be performed on both signals. o Any of the 3 meter values can have alarms, analogue output or comms by adding optional card.o Intuitive and easy programming (high flexibility)o Variable intensity displayo 16 points scaling for linearisationo Programmable function keys/user inputs\"Technical drawings available on datasheet\"
