OptioLaser L0200 for Level, Distance and Position Measurement of Solids and Liquids (up to 100m/328ft)
Actualizado: 2025-01-02
Principle of OperationThe OptioLaser L0200 is a non-contact laser sensor used to measure the distance to solid and liquid surfaces, slurries or murky water. Solid surfaces can be anything from a at metal plate on the side of an overhead crane, to the top of material stored in a silo. With an easy to use menu system, the OptioLaser can be configured for either distance or level measurement and the high accuracy, long range and fast update rate make this the ideal sensor for many different applications.
Series 420 Durablock® Inclined/Vertical Manometer
Actualizado: 2025-01-02
Dwyer® Series 420 Inclined-Vertical Manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20\" to provide ample multiplication of indicating fluid movement in this critical lower part of the range.Series TSX3 Digital Refrigeration Temperature Switch
Actualizado: 2025-01-02
The Series TSX3 Digital Refrigeration Temperature Switch was designed to control the compressor, fan, and defrost in refrigeration applications. This generation of controls has field selectable engineering units and temperature probe types in order to reduce the combination of parts that need to be stocked. A built-in real time clock is used for HACCP logging of temperature alarms caused by temperatures out of their set limits or loss of power. The Intelligent Defrost parameters manage the defrost cycle in order to save energy cost. The digital input can be used to remotely trigger a defrost cycle, monitor cooler door status, or act as an external alarm. For programming multiple units, the model TS2-K configuration key can be used to quickly download parameter settings.Series DP Double Bellows Differential Pressure Switch
Actualizado: 2025-01-02
Two opposing bellows combine maximum sensitivity and vibration resistance at a moderate cost in the Series DP Differential Pressure Switches. Both set and reset points are easily adjustable through non-interactive, externally accessible controls. Visible setpoint indicators simplify changes. SPDT snap action switch, 316 stainless steel or brass bellows, flanged steel housing. Rated pressures to 600 psig.Series TE Duct and Immersion Building Automation Temperature Sensor main
Actualizado: 2025-01-02
The Series TE Duct and Immersion Temperature Sensor can be used to monitor air or water temperature throughout a building management system or an air handler unit. Flanged duct sensors monitor the supply or return air and provide a thermistor or RTD output to the digital controller. Immersion sensors which are supplied with compression fittings are typically used to monitor the hot or chilled water lines throughout a building. Thermowells are recommended, but not required on the immersion sensors.Series 8600 Temperature/Process Controller
Actualizado: 2025-01-02
Series 8600 Temperature/Process Controllers set a new standard for quality, ease-of-use and value. While a high level of standard features are included, many function setup items appear in the control menu only when the function is selected, so you don\'t have to wade through unnecessary items. Units feature a universal input for thermocouple types J, K, E, T, L, N, B, C, S, & R; RTDs - 100? Plt. NIST, 100? Plt. DIN, 120? Ni Industrial, 1000? Plt. DIN; differential input (-10 to +10 mV DC) and process input (0 to 20 mA DC, 0 to 10 VDC). A standard 24 volt isolated, regulated power supply is included to operate most standard 4-20 mA transmitters.
