Mostrando 1–12 de 38 resultados

Valvula 1/2″ GAS

Código: C11043001623
Valorado en 0 de 5
Valvula 1/2\" GAS UNF-ALEMANIA

Valvula V15

Código: OM-000013272
Valorado en 0 de 5
Valvula V15 A M 10x1.5 -5/8\" 18 UNF INOX

HYDRONEUMATIC DEPOSITS

Código: HYDRONEUMATIC DEPOSITS - HIDRAER
Valorado en 0 de 5
Hydropneumatic tanks are containersclosed where water accumulates under pressure.This water storage weallows to have an amountDetermine and avoid pressure spikes.Once the water consumption has started, the pump does notit will start working until the moment whenthe pressure drops to a minimum, avoiding thismode the constant starts and stops in additionwater hammer

Low Pressure Stainless Steel BLP -SS

Código: Low Pressure Stainless Steel BLP -SS - HIDRAER
Valorado en 0 de 5
High corrosion resistance typically for API systems or O&G applicationsLow inertia and fast response for control system applications

Bladder accumulator high pressure BHP -SS

Código: Bladder accumulator high pressure BHP -SS - HIDRAER
Valorado en 0 de 5
High corrosion resistance typically for O&G applicationsLow inertia and fast response for control system applications

Fixations

Código: Fixations - HIDRAER
Valorado en 0 de 5
These accessories (clamps, brackets & rubber rings) allow a fixation perfectly adapted to the accumulators. All them fulfil the last regulations andare according to rules in force

Precharge kit VGU

Código: Precharge kit VGU - HIDRAER
Valorado en 0 de 5
The universal inflation checker type OLAER VGU, is the indispensable instrument to verify the inflation and the nitrogen purge of allaccumulators on the market, up to the maximum operating pressure of 340 bar-600 bar, according to flexible.This is connected directly to the inflation valve of the accumulator by means of a flexible to the nitrogen bottle. To check the pressure orwell to discharge the accumulator, the flexible is not necessary

Safety Block Type SB 24

Código: Safety Block Type SB 25 - HIDRAER
Valorado en 0 de 5
The blocks SB 24 are designed to regroup in a single compact component all the necessaryorgans for a good operation of a Hydraulic installation with hydroneumatic accumulator.The components of the blocks DI 16 basically are:- 1 ball valve with closing by handle turn of 90º in order to isolate the accumulator of thegeneralcircuit.- 1 pressure relief valve regulated at maximum pressure of the accumulator (never this valve mustbe used as a protection of the hydraulic pump)

safety block for accumulator B25X-B32X

Código: safety block for accumulator B25X-B32X - HIDRAER
Valorado en 0 de 5
No hay información adicional

Safety Block type SB 16

Código: Safety Block type SB 16 - HIDRAER
Valorado en 0 de 5
The blocks SB 16 are designed to regroup in a single compact component all the necessaryorgans for a good operation of a Hydraulic installation with hydroneumatic accumulator.The components of the blocks SB 16 basically are:- 1 ball valve with closing by handle turn of 90º in order to isolate the accumulator of the generalcircuit.- 1 pressure relief valve regulated at maximum pressure of the accumulator (never this valve mustbe used as a protection of the hydraulic pump)

safety block for accumulator B20X

Código: safety block for accumulator B20X - HIDRAER
Valorado en 0 de 5
No hay información adicional

safety block for accumulator B10X

Código: safety block for accumulator B10X - HIDRAER
Valorado en 0 de 5
No hay información adicional