Mostrando 1–12 de 1452 resultados

​DIFFERENTIAL PRESSURE TRANSMITTER

Código: MS2-W112
Valorado en 0 de 5
DIFFERENTIAL PRESSURE TRANSMITTER
Brand: DWYER
in w.c.: ±1, ±2, ±3, ±5
Pa: ±250, ±500, ±750, ±1250
mm w.c.:  25, 50, 75, 125
kPa: 0.25, 0.5, 0.75, 1.25
Stability: ±1% / year FSO.
Temperature Limits: 0 to 150°F (-18 to 66°C).
Pressure Limits: 1 psi max., operation; 10 psi burst.
Power Requirements: 10-35 VDC (2-wire), 17-36 VDC or isolated 21.6-33 VAC (3-wire).
Current Consumption: 40 mA max.
Display (Optional): 5 digit LCD.
Electrical Entry: 1/2˝ NPS thread.
Process Connection: 3/16˝ ID tubing (5
mm ID); Max. OD 9 mm.
Enclosure Rating: IP66.

​DIFFERENTIAL PRESSURE TRANSMITTER

Código: MS2-W111
Valorado en 0 de 5
DIFFERENTIAL PRESSURE TRANSMITTER
Brand: DWYER
in w.c.: ±0.10, ±0.15, ±0.25, ±0.50
Pa: ±25, ±40, ±50, ±125
mm w.c.: ±2.5, ±4, ±6, ±10
kPa: ±0.025, ±0.04, ±0.05, ±0.125
Stability: ±1% / year FSO.
Temperature Limits: 0 to 150°F (-18 to 66°C).
Pressure Limits: 1 psi max., operation; 10 psi burst.
Power Requirements: 10-35 VDC (2-wire), 17-36 VDC or isolated 21.6-33 VAC (3-wire).
Current Consumption: 40 mA max.
Display (Optional): 5 digit LCD.
Electrical Entry: 1/2˝ NPS thread.
Process Connection: 3/16˝ ID tubing (5
mm ID); Max. OD 9 mm.
Enclosure Rating: IP66.

​MAGNESENSE DIFFERENTIAL PRESSURE TRANSMITTER, 5 in w.c., 125 Pa, 12.5 mm w.c

Código: MSX-W20-IN
Valorado en 0 de 5
MAGNESENSE DIFFERENTIAL PRESSURE TRANSMITTER
Brand: DWYER
MOUNTING: Wall mount
DIRECTION: Bidirectional
RANGE: 5 in w.c., 125 Pa, 12.5 mm w.c
PRESSURE UNIT: Inches water columna

​STATIC PRESSURE FITTING, 3/16˝ and 1/8˝ ID

Código: A-308
Valorado en 0 de 5
STATIC PRESSURE FITTING
Brand: DWYER
for 3/16˝ and 1/8˝ ID plastic or rubber tubing

​MAGNESENSE DIFFERENTIAL PRESSURE TRANSMITTER, 5 in w.c., 1250 Pa, 125 mm w.c.

Código: MSX-W22-IN
Valorado en 0 de 5
MAGNESENSE DIFFERENTIAL PRESSURE TRANSMITTER
Brand: DWYER
MOUNTING: Wall mount
DIRECTION: Bidirectional
RANGE: 5 in w.c., 1250 Pa, 125 mm w.c.
PRESSURE UNIT: Inches water columna

​​FLANGE FOR MOUNTING , 1/8˝ NPT

Código: A-345
Valorado en 0 de 5
FLANGE FOR MOUNTING 
Brand: DWYER
Aluminum with gasket and sheet metal screws
1/8˝ NPT

​TEMPERATURE/PROCESS CONTROLLER, RTD, DC, 200μA máximum

Código: 86111-0
Valorado en 0 de 5
TEMPERATURE/PROCESS CONTROLLER
Brand: DWYER
Output A: SSR
Output B: SSR
Selectable Inputs: Thermocouple, RTD, DC voltage or DC current.
Thermocouple: 3 megohms minimum;
Voltage: 5000 ohms;
Current: 10 ohms;
RTD Current: 200μA máximum
Accuracy: ±0.25% of span, ±1 least significant digit.
Supply Voltage: 100 to 240 VAC nominal
Operating Temperature: 14 to 131°F (-10 to 55°C).

HUMIDITY/TEMPERATUREDEW POINT TRANSMITTER, 4-20 mA/0-5 VDC/0-10 VDC

Código: RHP-2N40
Valorado en 0 de 5
HUMIDITY/TEMPERATUREDEW POINT TRANSMITTER
Brand: DWYER
Accuracy: 2% accuracy
Housing: North American style wall mount
Humidity/Dew Point Output: 4-20 mA/0-5 VDC/0-10 VDC
Temperature Output: None

HUMIDITY/TEMPERATURE TRANSMITTER, Cable Length: 16´

Código: RHT-R016
Valorado en 0 de 5
HUMIDITY/TEMPERATURE TRANSMITTER
Brand: DWYER
Cable Length: 16´
Output: Current
Relative Humidity Range: 0 to 100% RH.
Temperature Range: -40 to 140°F (-40 to 60°C)
Accuracy: ±2% @ 10-90%.
Temperature Limits: -40 to 140°F (-40 to 60°C).
Storage Temperature: -40 to 176°F (-40 to 80°C).
Compensated Temperature Range: -4 to 140°F (-20 to 60°C).
Power Requirements: 10-35 VDC.
Output Signal: 4-20 mA loop powered.
Response Time: Less than 15 s.
Electrical Connections: Terminal block.
Conduit Connection: 1/2˝ NPT.
Process Connection: 1/2 NPSM.

TEMPERATURE SENSOR, 1/2″, 4″

Código: TE-IBW-F0443-12
Valorado en 0 de 5
Series TE Duct and Immersion Building Automation Temperature Sensor
Brand: DWYER
IBW: Housing: Immersion In Nema 4x Housing
F: Sensor Type: 20K Thermistor
04: Insertion lenght: 4”
4: Probe diameter: 1/4\" Double Encapsulated
3: Cable Configuration: 4\" Flying Leads with Spade Terminals
12: Connection Size: ½” NPT

TEMPERATURE SENSOR, 1/4″ Double Encapsulated, 6″

Código: TE-DFG-A0643-00
Valorado en 0 de 5
TEMPERATURE SENSOR
Brand: DWYER
Housing: Duct Flange In Housing
Sensor Type: 10K Type III Thermistor
Insertion Length:  6\"
Probe Diameter: 1/4\" Double Encapsulated
Cable Configuration: 4\" Flying Leads with Spade Terminals
Connection Size: None - Replacement Probe

​WALL MOUNT HUMIDITY/TEMPERATURE, , 4-20 mA/0-5 VDC/0-10 VDC

Código: RHP-2N44-LCD
Valorado en 0 de 5
WALL MOUNT HUMIDITY/TEMPERATURE/DEW POINT TRANSMITTERS
Brand: DWYER
Accuracy: 2% accuracy
Housing: North American style wall mount
Humidity/Dew Point Output: 4-20 mA/0-5 VDC/0-10 VDC
Temperature Output: 4-20 mA/0-5 VDC/0-10 VDC
Options: LCD display