SERVIDOR DE TIEMPO M300, RJ45 connector

Código: LANTIMEM300/MRS/LNE/TC-1-1w/o(GPSANT+

Modelo: LANTIME M300/MRS/LNE/TC-1-1 w/o (GPSANT+SPRO+10)
Description:  NTP time server with ultra-stable integrated oscillator OCXO-HQ *) 
and Intelligent Reference Selection Algorithm (IRSA)
Marca: MEINBERG
Intelligent switching between available synchronization sources 
(MRS): GPS, Time Code (e.g. IRIG-B), Pulse Per Second (PPS)
10MHz or  external NTP servers.
4 x LAN interface 10/100 MBit, RJ45 connector
1 x Terminal RS232 interface, 9pin D-Sub male connector 
for initial setup and configuration
1 x USB Service interface
1 x LC-Display (2 x 40 characters) and 8 push buttons
4 x status LEDs

Reference Inputs:
1 x Meinberg GPS antenna input, BNC connector, isolated
1 x PPS input, TTL, pulse duration >= 5µs, active high, female BNC connector
1 x 10 MHz input, sine (1.5Vpp – 5Vpp) or TTL,  female BNC connector
1 x Time Code modulated input, BNC connector, isolated by transformer
      Insulation voltage  3000 VDC
      Input impedance: 50 Ohm, 600 Ohm, 5 kOhm 
      Internally selectable by jumper (default 600 Ohm)
      Input signal : 600mV to 8V (Mark, peak-to-peak)
1 x Time Code unmodulated input, BNC connector, isolated  by opto-coupler
      Insulation voltage           : 3750 Vrms
      Internal series resistor  : 330 Ohm,
      Max. input current           : 25mA
      Diode forward voltage : 1.0V…1.3V
      selectable Time Code Inputs, modulated / unmodulated (DCLS):
      B122/123 / B002/003
      B126/127 /  B006/007
      IEEE1344 (modulated and DCLS)
      AFNOR NFS 87-500 (modulated and DCLS)

Signal Outputs:
2 x RS232 interface, independent, 9pin D-Sub female connector
with multi data formats timestrings.
1 x PPS, TTL into 50 ohm, pulse duration 200 msec, active high
female BNC connector
1 x Standard Frequency 10 MHz, TTL into 50 ohm
female BNC connector
1 x Alarm Relay Output, change-over contact, 3pin DFK connector
1 x IRIG-B amplitude modulated sinewave output (TC mod)
3 Vpp into 50 ohm, female BNC connector 
1 x IRIG-B pulse-width modulated DC output (TC DCLS)
TTL into 50 ohm, active high, female BNC connector
(mod.and unmod. Time Code signals are generated in parallel ) 
additional Time Codes  available: IEEE1344, C37.118 
and AFNOR NFS 87-500

Technical specifications:
Power supply: 100-240 V AC (50-60 Hz), with EU power cable
Power consumption: max. 30 W
19″ metal chassis, 1 U/84 HP (483 mm wide x 43 mm high x 285 mm deep)
Includes:
1 x Manuals in English on USB stick
Without GPS Antenna, surge suppressor and coaxial cables.