Mostrando 1–36 de 130 resultados

GEAR PUMPS KF

Código: GEAR PUMPS KF
Valorado con 0 de 5

Actualizado: 2024-02-27

Gear pumps KF are used to pump a wide range of liquids. The pumps impress in particular with their wide range of variants, which can be combined as required and also extended at a later date thanks to their modular design. The pumps are also great for media with low lubricating properties.

GEAR PUMPS BT

Código: GEAR PUMPS BT
Valorado con 0 de 5

Actualizado: 2024-02-27

BT and BTH series pumps are low speed gear pumps for pumping a wide range of medium to high viscosity liquids, provided they ensure a certain minimum lubrication, do not contain solid particles and are chemically compatible.

GEAR PUMPS DT

Código: GEAR PUMPS DT
Valorado con 0 de 5

Actualizado: 2024-02-27

DuroTec® gear pumps DT for abrasive and poorly lubricating fluids.
Displacement: 3.0 … 250 cm³/rev
Temperature range: -20 … 150 °C
Maximum pressure: … 150 bar

GEAR PUMPS KF COATED

Código: GEAR PUMPS KF COATED
Valorado con 0 de 5

Actualizado: 2024-02-27

Gear pumps KF coated for dosing fluids in process engineering processes.
Displacement: 4.0 … 24 cm³/rev
Temperature range: -10 … 200 °C
Maximum pressure: … 50 bar

METERING PUMPS ADP

Código: METERING PUMPS ADP
Valorado con 0 de 5

Actualizado: 2024-02-27

High precision external gear metering pump for dosing fluids.
Displacement: 0.1 … 20.0 cm³/rev
Temperature range: -20 … 200 °C
Maximum pressure: … 200 bar

HYDRAULIC PUMPS KP

Código: HYDRAULIC PUMPS KP
Valorado con 0 de 5

Actualizado: 2024-02-27

HIGH PRESSURE GEAR PUMPS WITH HYDRAULIC AXIAL CLEARANCE COMPENSATION
High pressure KP gear pumps are preferably used in oil hydraulic systems. The main components include the housing and the flange cover. They can withstand high dynamic loads which means they are insensitive to pressure peaks and continuous vibrations. Thanks to their design and the materials used, the pumps are ideal for deployment under the toughest operating conditions.

TWO-STAGE LUBRICATING OIL PUMP OF A DIESEL ENGINE

Código: TWO-STAGE LUBRICATING OIL PUMP OF A DIESEL ENGINE
Valorado con 0 de 5

Actualizado: 2024-02-27

Very slim pump design optimised for the installation space of a diesel engine with three gears for oil demand at high speeds. The pump has two suction connections to balance different oil levels and additionally a pressure relief valve.

PRE-LUBRICATION PUMP OF A DUAL FUEL DIESEL ENGINE

Código: PRE-LUBRICATION PUMP OF A DUAL FUEL DIESEL ENGINE
Valorado con 0 de 5

Actualizado: 2024-02-27

This pump has a housing design adapted to a diesel engine. The three different flow rates required are achieved by means of adapted gear ratios in the pump’s own reduction gear. The pump also has an integrated pressure relief valve.

DIRECT DRIVEN DIESEL OIL PUMP

Código: DIRECT DRIVEN DIESEL OIL PUMP
Valorado con 0 de 5

Actualizado: 2024-02-27

Specially optimised gear pump for pumping diesel oil at very low speeds, so an extremely wide speed range is enabled for this pump. The pump is designed for direct mounting on a diesel engine and has pressure control and shut-off valves and two optional pressure and suction connections.

DIRECT DRIVEN MAIN LUBRICATING OIL PUMP WITH CONTROL VALVE

Código: DIRECT DRIVEN MAIN LUBRICATING OIL PUMP WITH CONTROL VALVE
Valorado con 0 de 5

Actualizado: 2024-02-27

Specially optimised lubricating oil pump for high speeds, suitable for direct drive by a gear on the crankshaft.
A special feature is the integrated pressure control valve with maximum pressure connection and the possibility of connecting an external pressure control line.

DIRECT DRIVEN MAIN LUBRICATING OIL PUMP FOR INSTALLATION IN THE ENGINE SUMP

Código: DIRECT DRIVEN MAIN LUBRICATING OIL PUMP FOR INSTALLATION IN THE ENGINE SUMP
Valorado con 0 de 5

Actualizado: 2024-02-27

Lubricating oil pump with a specially adapted housing construction for installation in the oil pan of a diesel engine.
Special features are the gear reducer and various pressure connections for the direct connection of oil filters and cooling circuits.

INTERNAL GEAR PUMP FOR GEAR LUBRICATION

Código: INTERNAL GEAR PUMP FOR GEAR LUBRICATION
Valorado con 0 de 5

Actualizado: 2024-02-27

Internal gear pump with involute gearing and a specially developed design for mounting on vehicle gearboxes.

GEAR PUMP FOR THE LUBRICATION OF WIND POWER GEARS

Código: GEAR PUMP FOR THE LUBRICATION OF WIND POWER GEARS
Valorado con 0 de 5

Actualizado: 2024-02-27

Lubricating oil pump with integrated valve technology to ensure constant delivery direction with different directions of rotation. The pump is designed for coasting operation and for direct mounting on wind turbine gearboxes. Capable of cold weather operation (CCV – Cold Climate Version) or low temperatures down to -50 °C.

PUMPS WITH HEAVY-DUTY OUTBOARD BEARING

Código: PUMPS WITH HEAVY-DUTY OUTBOARD BEARING
Valorado con 0 de 5

Actualizado: 2024-02-27

Standard pumps with special adapters matched to the specified installation space, including a drive gear for mounting and direct drive on a wide variety of machines. Particularly well-suited for absorbing high drive forces.

GEAR TYPE FLOW METERS VC

Código: GEAR TYPE FLOW METERS VC
Valorado con 0 de 5

Actualizado: 2024-02-27

Application-optimized specifications with differing clearances, bearing variants and materials

GEAR TYPE FLOW METERS VC 0.01

Código: GEAR TYPE FLOW METERS VC 0.01
Valorado con 0 de 5

Actualizado: 2024-02-27

The world’s smallest gear type flow meter accurately measures volume flows from 0.3 ml/min. The VC 0.01 is easily capable of measuring very small volumes and micro-doses of media with viscosities from 0.8 mm²/s.

GEAR TYPE FLOW METERS VC WITH ENCODER

Código: GEAR TYPE FLOW METERS VC WITH ENCODER
Valorado con 0 de 5

Actualizado: 2024-02-27

With maximised measured value resolution for high-precision measurements in process and test bench technology

GEAR TYPE FLOW METERS VC WITH IO-LINK TECHNOLOGY

Código: GEAR TYPE FLOW METERS VC WITH IO-LINK TECHNOLOGY
Valorado con 0 de 5

Actualizado: 2024-02-27

For bidirectional communication between any control level and the VC-IO-link

GEAR TYPE FLOW METERS VCA

Código: GEAR TYPE FLOW METERS VCA
Valorado con 0 de 5

Actualizado: 2024-02-27

Precise flow meters made of aluminum

SCREW TYPE FLOW METERS SVC

Código: SCREW TYPE FLOW METERS SVC
Valorado con 0 de 5

Actualizado: 2024-02-27

Particularly suitable for highly viscous media with abrasive fillers

SCREW TYPE FLOW METERS SVC WITH ENCODER

Código: SCREW TYPE FLOW METERS SVC WITH ENCODER
Valorado con 0 de 5

Actualizado: 2024-02-27

With maximized measured value resolution for high-precision measurements in process and test bench technology

SCREW TYPE FLOW METERS SVC WITH IO-LINK TECHNOLOGY

Código: SCREW TYPE FLOW METERS SVC WITH IO-LINK TECHNOLOGY
Valorado con 0 de 5

Actualizado: 2024-02-27

Signal conversion with internal calculation of measured values

TURBINE FLOW METERS TM

Código: TURBINE FLOW METERS TM
Valorado con 0 de 5

Actualizado: 2024-02-27

KRACHT TM turbine flow meters are proven and widely used measuring devices in industrial fluid measurement technology. The instruments provide reliable, continuous and accurate measurement of liquids flowing under pressure in closed pipes. Thanks to the stainless steel design, the flow meters are suitable for a variety of even aggressive media.

CORIOLIS MASS FLOW METERS CMM

Código: CORIOLIS MASS FLOW METERS CMM
Valorado con 0 de 5

Actualizado: 2024-02-27

Coriolis mass flow meters are used to measure and control the mass flow of fluids. Compared to all other flow meters, they offer the great advantage that the mass flow is measured independently of the material properties. This means that multi-phase substances can also be measured without interference. A wide range of nominal sizes ensures highly accurate measurements.

CONTROL UNIT ASR 30

Código: CONTROL UNIT ASR 30
Valorado con 0 de 5

Actualizado: 2024-02-27

The ASR 30 is a control unit which can be operated via touch screen. In addition, the unit can be expanded with manual operating units. This allows the implementation of numerous fluid technology applications. Standardized programs are available for various applications. The ASR 30 programming can be optimally adapted to the respective application.

CONTROL UNIT AS 8

Código: CONTROL UNIT AS 8
Valorado con 0 de 5

Actualizado: 2024-02-27

The AS 8 control unit processes incremental input signals from the flow meters. The input signals are filtered in the unit, converted, and computed into the physical sizes of flow rate or volumes.

PLUG-ON DISPLAY SD 1

Código: PLUG-ON DISPLAY SD 1
Valorado con 0 de 5

Actualizado: 2024-02-27

The SD 1 plug-on display is a universally applicable local display for all volume counter series (VC, SVC, TM) with Hirschmann plugs. The display can show either flow rate or volume.

GEAR TYPE FLOW METER VC BOOSTER

Código: GEAR TYPE FLOW METER VC BOOSTER
Valorado con 0 de 5

Actualizado: 2024-02-27

Booster units are used to condition fuels in order to make them usable for combustion engines with regard to purity, pressure and viscosity. These systems are operated under the toughest conditions. The components used must withstand dirt, heat and pressure pulsations. Here, the gear type flow meter VC BOOSTER guarantees the highest precision under the most severe conditions.
> Space-optimised construction
> Remote electronics for safe evaluation outside the hot machine areas
> Suitable for all common fuels

VOLUMEC VALVE POSITION INDICATOR

Código: VOLUMEC VALVE POSITION INDICATOR
Valorado con 0 de 5

Actualizado: 2024-02-27

The valve position indicator VOLUMEC is an interlinking unit with the connection hole pattern for directly controlled NG 06 directional control valves. In detail, the module comprises a valve block, volume counter and display unit. Mounted on a connection plate and completed with a directional control valve, the VOLUMEC is used to control hydraulically operated ship valves for ballast, cargo or stripping systems, to measure and display the adjustment travel of the valve.
The control module is designed for installation in deck boxes. The display of the volumetrically detected valve position can be read visually directly on site or electrically via potentiometer or limit switches.

Priming pot

Código: Priming pot - Munsch
Valorado con 0 de 5

Código Interno:

made of Polypropylene (PP)

CS

Código: CS - Munsch
Valorado con 0 de 5

Código Interno:

Armoured horizontal pump with mechanical seal

CS-B

Código: CS-B - Munsch
Valorado con 0 de 5

Código Interno:

Armoured, close-coupled horizontal pump with mechanical seal

NP

Código: NP - Munsch
Valorado con 0 de 5

Código Interno:

Horizontal pump with mechanical seal

NP-B

Código: NP-B - Munsch
Valorado con 0 de 5

Código Interno:

Horizontal pump with mechanical seal

NPC

Código: NPC - Munsch
Valorado con 0 de 5

Código Interno:

Armoured horizontal pump with mechanical seal

NPC Mammut

Código: NPC Mammut - Munsch
Valorado con 0 de 5

Código Interno:

NPC 300-250-400 and NPC 500-400-700 armoured horzontal pump with mechanical seal