local mount display with pulse outbrbrlimited stock
Actualizado: 2024-03-07
Features & BenefitsLocal mount Pulse Out Transmitter with battery powered display
Works with the G, G2, and OM Series Flowmeters. (OM meters require factory installation only. G2 meters require 510 Adapter, please contact us.)
Flow rate and totals in GPM. 9V Battery not included.
Can rotate 180° Horizontally and 90° Vertically
Accuracy: ±0.1% of reading; Primary Output: Open Collector (NPN); Pulse Out: Max. \"OFF\" Voltage: 60V Max. \"ON\" Current: 200 mA Max. \"ON\" Voltage Drop: <0.5 V @ 200 mA; Electrical: Strain Relief: Hubble PG7 Strain Relief Thread: Female 1/2-20 UNF-2B Local: No cable provided (510 Series only); Power Supply: 9-volt battery or externally powered Voltage Supply (Min.): 7 VDC Voltage Supply (Max.): 30 VDC; Input Options: Hall Effect, Reed Switch, Open Collector or Low Level Sine Wave; Mechanical Mounting Connections: Unit is mounted to meter body, 1\" NPT; Frequency: Low Level Coil (LLC): 0 - 1000 Hz High Level Low Freq.: 0 - 150 Hz High Level High Freq.: 0 - 1000 Hz; Enclosure Rating: NEMA 4X / IP55; Calibratable by K-Factory Entry
14°F to 140°F (-10°C to 60°C)
local mount display with 420ma transmitterbrbrlimited stock
Actualizado: 2024-03-07
Features & BenefitsLocal mount 4-20mA Output Transmitter with display Flowrate in GPM 9V Battery not includedWorks with the G, G2, and OM Series Flowmeters. (OM meters require factory installation only. G2 meters require 510 Adapter, please contact us.)Features a signal conditioner with industry standard current loop output. Can rotate 180° Horizontally and 90° VerticallyAccuracy: ±0.1% of reading; Primary Output: Loop (4-20 mA or 0-20 mA) Minimum: 1.5 mA Maximum: 25 mA; Auxiliary Outputs: Single Ended Minimum: 0.1V Maximum: 4.9 V; Pulse Out: Max. \"OFF\" Voltage: 60V Max. \"ON\" Current: 200 mA Max. \"ON\" Voltage Drop: <0.5 V @ 200 mA; Strain Relief: Hubble PG7 Strain Relief Thread: Female 1/2-20 UNF-2B Local: No cable provided (510 Series only); Power Supply: 2-wire, loop powered Voltage Supply (Min.): 8.5 VDC Voltage Supply (Max.): 35 VDC; Input Options: Hall Effect, Reed Switch, Open Collector or Low Level Sine Wave; Mechanical Mounting Connections: Unit is mounted to meter body, 1\" NPT; Low Level Coil (LLC): 0.25 - 1000 Hz High Level Low Freq.: 0.25 - 150 Hz High Level High Freq.: 0.25 - 1000 Hz Optically Isolated HLLF: w/2500 V optical isolation Optically Isolated HLHF: w/2500 V optical isolation; Enclosure Rating: NEMA 4X / IP55; Calibratable by K-Factory Entry
32°F to 140°F (0° to 60°C)
rt14 flow rate totalizer om ss aluminum
Actualizado: 2024-03-07
Features & BenefitsPlease contact us with exact application before ordering to determine if PN RT142D0MM is required for local meter mount or PN RT142D0FM is required for remote field mount.Additional parts may be required. External power recommended. MustAdditional options are available including Intrinsically Safe option and External Power option for Backlit Display.Inquire for assembly charges.Flow rate totalizer with 4-20mA, scaleable pulse & alarm outputs, and backlit LCD in a GRN housing