EOT CRANE OVERLOAD PROTECTION ELECTRONICS WITH 1 OR 3 SET-POINTS

Código: BRIDGE-BOY
Valorado con 0 de 5

Código Interno:

Reference : BRIDGE-BOYElectronics with 1 or 3 set-points designed, in combination with a load cell, to limit the load and/or to detect slack cable on a hoisting device (EOT cranes). o Low cost o 1 or 3 independent set-pointso Set-points 1 and 2 configurated for load limitationo Set-point 3 configurated by default for slack cable detectiono Adjustments by potentiometerso Analogue outputs: 0...10 V and 4...20 mAo Din rail mounting (TS 35)o 115 VAC available by internal jumper\"Technical drawings available on datasheet\"

ECONOMICAL CUSTOM-MADE LOAD PINS

Código: 5600
Valorado con 0 de 5

Código Interno:

Reference : 5600Custom-made load pins designed to be installed at the same place of a common axle without change to the existing mechanical environment. Economical version of model 5000. o Complete range of CE certified electronics, load limiters and displays available for hoisting applications and liftso Useful diameter smaller than or equal to 39 mmo With axial cable glando Sturdy designo Material: stainless steelo Protection class: IP65o Cable length: 6 m (other lengths available on requestTechnical drawings available on datasheet

WIRE ROPE LOAD CELLS

Código: 5500-5505
Valorado con 0 de 5

Código Interno:

Reference : 5500-5505 Low cost load cells specially designed to measure the tension force on hoisting ropes.o CE certified for hoisting applicationso Easy installation directly without dismantling on the hoisting ropeo Wide range of measured loads on cable (from 0.25 up to 24 t) and suitable cables (available diameters: from 6 up to 46 mm)o Material: - 5500: stainless steel - 5505: nickel-plated steelo Protection class: IP65o Sturdy designo Reliable and economical solutiono Complete range of \"CE\" certified electronics and load limiters availableo Cable length: see drawing table - CL (other lengths available on request)Technical drawings available on datasheet

TENSION LINK LOAD CELLS

Código: 5200L-5205L
Valorado con 0 de 5

Código Interno:

Reference : 5200L-5205LTension link load cells specially designed for load limitation on hoisting devices.o Sturdy designo Breaking load > 500 %o CE certified for hoisting deviceso Protection class: IP66o Material: stainless steel (5200L), nickel-plated steel (5205L)o Easy to install (standard shackles) o Cable length: 0.5...5 t: 3 m (other lengths available on request) 10 t: 6 m (other lengths available on request)o Complete range of CE certified electronics and load limiters availableTechnical drawings available on datasheet

SUBSEA LOAD SHACKLES

Código: 5050M
Valorado con 0 de 5

Código Interno:

Reference : 5050MLoad measuring shackles designed to measure subsea tension forces. o CE certified for hoisting applications o Protection class: IP68 o Depth: up to -7500 m / -24 606 ft (750 bars / 11 000 psi) - deeper on request o Sturdy design o Material: stainless steel except shackle bow o Easy to install o Complete range of CE certified electronics, load limiters and display available o Cable length: 6 m (other lengths available on request)Technical drawings available on datasheet

LOAD SHACKLES

Código: 5000M
Valorado con 0 de 5

Código Interno:

Reference : 5000MLoad measuring shackles designed to measure tension force.o CE certified for hoisting applicationso Sturdy designo Load pin material: stainless steelo Protection class: IP65o Easy to install o Cable length: 6 m (other lengths available on request)o Complete range of CE certified electronics and load limitersTechnical drawings available on datasheet

LOAD MEASURING WEDGE SOCKETS

Código: 5000B
Valorado con 0 de 5

Código Interno:

Reference : 5000BLoad measuring wedge sockets designed to measure the force applied on a cable end.o CE certified for hoisting applicationso Sturdy designo Load pin material: stainless steelo Protection class: IP65o Easy to installo Cable length: 6 m (other lengths available on request)o Complete range of CE certified electronics and load limitersTechnical drawings available on datasheet

HIGH-CAPACITY STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION

Código: 5105-ISO
Valorado con 0 de 5

Código Interno:

Reference : 5105-ISOStandard reference force transducers specially designed according to the ISO 376 standard (classes 1, 0,5 and 00).o Wide range of capacities (up to 50 MN)o Complete range of load accessorieso Tension and / or compression (universal)o Protection class: IP65o Material: alloy steel (stainless steel available on request)o Cable length: see drawing table - CL (other lengths available on request)Technical drawings available on datasheet

HIGH-CAPACITY COMPRESSION STANDARD REFERENCE FORCE TRANSDUCERS

Código: 3115-ISO
Valorado con 0 de 5

Código Interno:

Reference : 3115-ISOStandard reference force transducers specially designed according to ISO 376 standard (classes 1, 0,5 and 00). o Wide range of capacities (up to 50 MN)o Complete range of load accessorieso Protection class: IP65o Material: alloy steel (stainless steel available on request)o Cable length: see drawing table - CL (other lengths available on request)Technical drawings available on datasheet

STRAIN GAUGE CYLINDERS (HARDENED CONCRETE TESTING)

Código: 3115F-12390
Valorado con 0 de 5

Código Interno:

Reference : 3115F-12390Standard reference force transducers specially designed for checking concrete testing machines according to the EN 12390-4 or standard DIN 51302-2.o Allows the homogeneity of the repartition of the forces generated to be checked by verifying: - self-alignment and restraint on movement of the upper plate - alignment of the machine\'s component partso Standard dimensionso 4 independent full bridges at 90°o Protection class: IP65o Material: nickel-plated alloy steelo Cable length: 4 x 6 m (other lengths available on request)Technical drawings available on datasheet

STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION

Código: 2715-ISO
Valorado con 0 de 5

Código Interno:

Reference : 2715-ISOStandard reference force transducers specially designed according to the ISO 376 standard (classes 1, 0,5 and 00).o Wide range of capacitieso Tension and / or compression (universal)o Compact designo Complete range of load accessorieso Protection class: IP65o Material: alloy steel (stainless steel available on request)o Cable length: see drawing (other lengths available on request)Technical drawings available on datasheet

STANDARD REFERENCE FORCE TRANSDUCERS IN TENSION AND COMPRESSION

Código: 2712-ISO
Valorado con 0 de 5

Código Interno:

Reference : 2712-ISOStandard reference force transducers specially designed according to the ISO 376 standard (classes 1, 0,5 and 00).o Wide range of capacitieso Tension and / or compression (universal)o Compact designo Overload protection: see drawing tableo Complete range of load accessorieso Material: anodised aluminium alloyo Cable length: 3 m (other lengths available on request)Technical drawings available on datasheet