AquaMate® Portable LPR Corrosion Rate Instrument
Actualizado: 2024-01-02
The Aquamate™ is your best answer to the problem of getting quick and easy corrosion rate measurements in water systems. Simply plug the hand-held instrument into a LPR probe and press the measure key. In a few minutes the readout will display the corrosion rate in mils per year (MPY), the imbalance reading, conductivity, and, if you\'re using a ER Temperature LPR probe, the water temperature. The Aquamate™ instrument\'s patented Solution Resistance Compensation extends the low conductivity operating range from cooling water to condensate, feedwater, and drinking water systems. Manual conductivity correction is not required. The true corrosion rate will conveniently be displayed when the alloy multiplier is pre-programmed. In addition, the Aquamate™ measures the imbalance current between the electrodes, which is related to pitting activity. The instrument fits easily in a shirt pocket and is powered by a single 9 volt battery. Considering the features and size, this instrument sets a new standard for portable corrosion rate monitoring instrumentation.R-Y510 Wireless Access Point
Actualizado: 2024-01-03
The R-Y510 field wireless access point has a function to connect Cosasco wireless devices and a field wireless management station. The field wireless access point connects with field wireless devices by wireless communications, and connects with a field wireless management station by Ethernet or Wireless LAN. The field wireless access point is set up by the field wireless access point configuration software included in the field wireless access point.R-Y410 Management Station
Actualizado: 2024-01-03
The R-Y410 is based on wireless communications standard ISA100 Wireless for industrial automation of the International Society of Automation (ISA). This product has a system manager/security manager/gateway function based on ISA100 Wireless and combining this with Field Wireless Access Point (R-Y510) and Cosasco Wireless Devices composes the field wireless system.Wireless Rouge Monitoring System
Actualizado: 2024-01-02
The Wireless Rouge Monitoring system provides accurate measurement of ultralow corrosion (rouging) rates in high purity biopharmaceutical water systems. Monitoring the rouging rate of typical ions of ferric, chromium, molybdenum and nickel oxides in the water assists the determination of derouging and passivation frequency. The installation of a Rouge monitor provides absolute measurements for rouge rate and rouge accumulation (thickness).Downhole Corrosion Monitoring System DCMS™
Actualizado: 2024-01-01
The newly re-designed DCMS™ tool is the only tool available which provides recorded corrosion and temperature data for the hostile conditions of downhole operation. The DCMS™ tool may be attached to a variety of wireline approved running tools for insertion into the production well and can be set at any required depth.ALTA PRESIÓN BIO-SONDA 6205 – COSASCO
Código Interno:
Las Bio-Sondas de Cosasco para el sistema de 2 se usan para suspender los elementos de muestra en el área a ser monitoreada. Unida a la parte inferior del tapón sólido por medio de un hilo izquierdo, la bio-sonda también sirve como retenedor de empaque primario.
La bioensayo tiene cinco elementos de muestra, cada uno con un área frontal expuesta de 1 cm 2. Cada vez que se requiere una muestra para el análisis, un elemento sucesivo se elimina y se reemplaza por uno nuevo, dejando los otros cuatro en su lugar. Con este cambio sucesivo de elementos, se obtiene una exposición más larga para cada elemento, pero aún permite tomar una muestra relativamente frecuente para el análisis
MICROCOR® ER Y LPR SISTEMAS EN LÍNEA UNIDAD DE INTERFAZ INTELIGENTE (IIU)
Código Interno:
La unidad de interfaz inteligente está diseñada para su uso en sistemas en línea Microcor y E-9020 LPR de tamaño pequeño a mediano para una fácil integración en los sistemas SCADA y DCS existentes. El objetivo principal de la IIU es proporcionar el cálculo de la velocidad de corrosión de la pérdida de metal hecha por los transmisores de Microcor, ya que estos cálculos son demasiado complejos para la mayoría de los sistemas SCADA y DCS sin una programación personalizada.