Mostrando 1–24 de 29 resultados

Series 861H Hazardous Rated Solid State Relays

Código: Series 861H Hazardous Rated Solid State Relays
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series 861H Hazardous Rated Solid State Relay provides reliable
switching and long life operation in some of the most demanding applications,
such as medical equipment, mining, oil and gas. It integrates an internal heat
sink and internal snubber into a compact housing to save space in the panel. In
order to reduce installation time, integral tabs can be used to snap the relay
onto a DIN rail or surface mount to a wall inside the panel. LED indicator lights
give the user quick visual indication of the switch status. The 861H is
intrinsically safe rated for Class 1, Division 2 Groups A, B, C and D.

Series SSR Solid State Relay

Código: Series SSR Solid State Relay
Valorado con 0 de 5

Actualizado: 2024-02-17

Series SSR Solid State Relays amplify the current handling capability of a variety of sensors for controlling higher power loads. The relays are compact, totally encapsulated and impervious to shock or vibration. Units feature SPST, normally open switch operation and can control loads up to 5A or 10A depending on model. Models SSR-312 and SSR-324 are specifically designed to provide low current \"start-stop\" or \"on-off\" switching for industrial motor, liquid level, and other control systems. Units hold operational state up to a 1/2 second during momentary power loss to cut nuisance shutdowns.

Model SSR-15 Intrinsically Safe Relay

Código: Model SSR-15 Intrinsically Safe Relay
Valorado con 0 de 5

Actualizado: 2024-02-17

Model SSR-15 Intrinsically Safe Relay offers low power switching with solid state reliability and eliminates explosive conditions. Units are completely encapsulated and impervious to dust, moisture, or foreign material. Model SSR-15 can be mounted in any orientation and is shock and vibration resistant.

Series 861SSR DIN/Panel Mountable Solid State Relay

Código: Series 861SSR DIN/Panel Mountable Solid State Relay
Valorado con 0 de 5

Actualizado: 2024-02-17

Series 861SSR DIN/Panel Mountable Solid State Relay features an internal heat sink, bistable clips for DIN rail or panel mounting and an LED indicator light. It is a completely solid state relay - it has NO moving parts. The 861SSR provides reliable switching and long-life operation in applications where high inrush currents or induced currents can affect mechanical state relay operation. The compact housing also minimizes panel space.

Series 62 Hockey Puck Solid State Relay

Código: Series 62 Hockey Puck Solid State Relay
Valorado con 0 de 5

Actualizado: 2024-02-17

Series 62 Hockey Puck Style Solid State Relay features a terminal cover and LED status indicator. The optically coupled circuitry isolates the input terminals from the output terminals to give the relay 100% pure solid state performance.

Series 820 DIN Rail Mountable Time Delay Relay

Código: Series 820 DIN Rail Mountable Time Delay Relay
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series 820 DIN Rail Mountable Time Delay Relays can be configured in accordance with 10 different timing functions. Bright red and green LED’s indicate whether the input has been triggered and if the output is active. For greater accuracy, there are 10 time scales and a fine adjustment potentiometer that allows adjustment down to 0.1 seconds. Integral mounting ears allow the Series 820 to mount directly to a DIN rail.

Note: All purchases must be 10 units or more.

Series 750H Hermetically Sealed Relay

Código: Series 750H Hermetically Sealed Relay
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 750H Hermetically Sealed Electromechanical Relay is designed to be used in Class I Division 2 hazardous area locations. Gold flashed contacts provide protection against oxidation in low current / voltage applications. 8-pin and 11-pin sockets are available to allow quick and easy installation for both surface and DIN rail mounting.

Note: All purchases must be 10 units or more.

Series 199 Open Style Power Relays

Código: Series 199 Open Style Power Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 199 Open Style Power Relays are designed for high AC and DC current applications up to 40 Amps. These mercury-free DPDT relays are available in a variety of trigger voltages and coil resistances to fit most common applications. The riveted housing construction increases the durability and reduces the effects of vibration on the relay.

Note: All purchases must be 10 units or more.

Series 725 Power Relay

Código: Series 725 Power Relay
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 725 Power Relays are designed to switch high current loads in the most demanding of applications. By having a high dielectric strength from the coils to the contacts, the relay is able to withstand severe voltage surges and spikes as commonly seen in inductive loads. Flag and LED indicators show the relay status and if there is power to the coil. A push-to-test button allows for manual testing of the relay operation without providing an electrical trigger. Integral mounting ears allows the relay to be panel mounted or DIN rail mounted without the need for an external socket. For quicker wiring installation, the Series 725 is available with quick connect tabs or screw terminals.

Series 781 SPDT Ice Cube Relays

Código: Series 781 SPDT Ice Cube Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 781 Electromechanical Ice Cube Relay is a full-featured SPDT relay that can be used to handle loads up to 15 amps for AC or DC circuits. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lock-down lever holds the test button in place. The clear plastic housing gives a view of the contacts, and there is a removable I.D. tag for labeling the circuit.

Series 782 DPDT Ice Cube Relays

Código: Series 782 DPDT Ice Cube Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 782 Electromechanical Ice Cube Relay is a full-featured DPDT relay that can be used to switch two different devices with a single trigger. With a rating of 15 amps, the relay can be used to stop and start small fans, motors, and pumps directly. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color-coded. For testing the operation, a removable lock-down lever holds the test button in place. The clear plastic housing gives a view of the contacts, and there is a removable I.D. tag for labeling the circuit.

Series 783 3PDT Ice Cube Relays

Código: Series 783 3PDT Ice Cube Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 783 & 784 Ice Cube Relays are full-featured relays that can be used to handle loads up to 15 amps for AC or DC circuits. It features a flag status indicator and a LED status lamp to let the user know when the relay is activated. In order to differentiate between AC and DC actuated models, the push-to-test button is color coded and a removable lock-down lever holds the test button in place.

Series 784 4PDT Ice Cube Relays

Código: Series 784 4PDT Ice Cube Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

Series 782H Hermetically Sealed Ice Cube Relays

Código: Series 782H Hermetically Sealed Ice Cube Relays
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 782H Hermetically Sealed Ice Cube Relay is suitable for switching up to four circuits in a hazardous environment. It features a hermetically sealed housing and a safety seal to withstand a wash-down. The plug-in socket is easy to mount and remove from crowded DIN rails.

Series 3868 Tell Tale Jr.™ Open Heater Detector

Código: Series 3868 Tell Tale Jr.™ Open Heater Detector
Valorado con 0 de 5

Actualizado: 2024-01-04

The Tell Tale Jr.™ Open Heater Detector is designed to indicate an open heater or other resistive load. Several models are available for various applications. The LED models light an LED when current is flowing in the circuit. If current stops flowing, the LED turns off. Solid state switch models provide either a logic output for DC applications or a triac output for AC applications. These models will satisfy those applications that need to send heater data to a PLC or computer having an appropriate power supply. They are provided with 4 foot leads. If the triac output model is used to drive an inductive load (relay coil, etc.) then the 3138-00412 snubber network is required. While the Tell Tale Jr.™ Detector is self-powered there is no power loss in the monitored load circuit when installed.

RELÉS TIPO CUBO DE HIELO HERMÉTICAMENTE SELLADOS DE LA SERIE 782H

Código: SERIE 782H - DWYER
Valorado con 0 de 5

El relé herméticamente cerrado tipo cubo de hielo de la serie 782H es adecuado para conmutar hasta cuatro circuitos en un entorno peligroso. Cuenta con un alojamiento herméticamente sellado y un sello de seguridad para soportar un lavado. El receptáculo de enchufe es fácil de instalar y quitar de los rieles DIN aglomerados.

RELÉS TIPO CUBO DE HIELO DE LA SERIE 784 4PDT

Código: SERIE 784 4PDT - DWYER
Valorado con 0 de 5

El relé electromecánico tipo cubo de hielo de la serie 784 es un relé 4PDT con funcionalidad completa que puede usarse para manejar cargas de hasta 15 A para circuitos de CA o CC. Usando el mismo activador, este relé puede usarse en aplicaciones de estacionamientos subterráneos de vehículos para activar alarmas sonoras y visuales por altos niveles de monóxido de carbono, y abrir las compuertas de ventilación y encender los ventiladores de escape. Posee un indicador de estado mediante bandera y una luz de estado LED para informarle al usuario cuándo está activado el relé. A fin de diferenciar entre los modelos con accionamiento mediante CA y CC, el botón pulsador de prueba está codificado por color. Para la prueba de funcionamiento, una palanca de bloqueo extraíble mantiene el botón de prueba en su lugar. El alojamiento de plástico transparente brinda una visión de los contactos, y hay una etiqueta de identificación extraíble para el etiquetado del circuito.

RELÉS TIPO CUBO DE HIELO DE LA SERIE 783 3PDT

Código: SERIE 783 3PDT - DWYER
Valorado con 0 de 5

El relé tipo cubo de hielo electromecánico de la serie 783 es un relé 3PDT con funcionalidad completa que puede controlar hasta 3 dispositivos con un único activador. Cuenta con un indicador de estado mediante bandera y una luz de estado LED para informarle al usuario cuándo está activado el relé. A fin de diferenciar entre los modelos con accionamiento mediante CA y CC, el botón pulsador de prueba está codificado por color. Para la prueba de funcionamiento, una palanca de bloqueo extraíble mantiene el botón de prueba en su lugar. El alojamiento de plástico transparente brinda una visión de los contactos, y hay una etiqueta de identificación extraíble para el etiquetado del circuito. La serie 783 puede soportar cargas de hasta 15 A.

RELÉS TIPO CUBO DE HIELO DE LA SERIE 782 DPDT

Código: SERIE 782 DPDT - DWYER
Valorado con 0 de 5

El relé tipo cubo de hielo electromecánico de la serie 782 es un relé DPDT con funcionalidad completa que puede usarse para conmutar dos dispositivos diferentes con un solo activador. Con una clasificación de 15 A, el relé puede usarse para detener y encender pequeños ventiladores, motores y bombas en forma directa. Cuenta con un indicador de estado mediante bandera y una luz de estado LED para informarle al usuario cuándo está activado el relé. A fin de diferenciar entre los modelos con accionamiento mediante CA y CC, el botón pulsador de prueba está codificado por color. Para la prueba de funcionamiento, una palanca de bloqueo extraíble mantiene el botón de prueba en su lugar. El alojamiento de plástico transparente brinda una visión de los contactos y hay una etiqueta de identificación extraíble para el etiquetado del circuito.

RELÉS TIPO CUBO DE HIELO DE LA SERIE 781 SPDT

Código: SERIE 781 SPDT - DWYER
Valorado con 0 de 5

El relé tipo cubo de hielo electromecánico de la serie 781 es un relé SPDT con funcionalidad completa que puede usarse para manejar cargas de hasta 16 A para circuitos de CA o CC. Cuenta con un indicador de estado mediante bandera y una luz de estado LED para informarle al usuario cuándo está activado el relé. A fin de diferenciar entre los modelos con accionamiento mediante CA y CC, el botón pulsador de prueba está codificado por color. Para la prueba de funcionamiento, una palanca de bloqueo extraíble mantiene el botón de prueba en su lugar. El alojamiento de plástico transparente brinda una visión de los contactos y hay una etiqueta de identificación extraíble para el etiquetado del circuito.

RELÉ DE ALIMENTACIÓN SERIE 725

Código: SERIE 725 - DWYER
Valorado con 0 de 5

Los relés de alimentación serie 725 están diseñados para conmutar cargas de alta corriente de las aplicaciones más exigentes. Al tener una resistencia dieléctrica alta desde las bobinas hacia los contactos, el relé puede tolerar serios incrementos repentinos de voltaje y picos de sobretensión como normalmente se observa en las cargas inductivas. Los indicadores LED y la bandera muestran el estado del relé y si la bobina está recibiendo alimentación eléctrica. Un botón de pruebas permite realizar una prueba manual de la operación del relé sin incluir un disparo eléctrico. Las aletas de montaje incorporadas permiten instalar el relé en un panel o riel DIN sin necesidad de un conector externo. La serie 725 tiene lengüetas de conexión rápidas o terminales de tornillo para un cableado más rápido.

RELÉS DE ALIMENTACIÓN DE ESTILO ABIERTO SERIE 199

Código: SERIE 199 - DWYER
Valorado con 0 de 5

Los relés de alimentación de estilo abierto serie 199 están diseñados para aplicaciones de alta corriente de CA y CC hasta 40 Amp. Estos relés 2P2T sin mercurio están disponibles en diferentes voltajes de disparo y resistencia de bobina para adaptarse a las aplicaciones más comunes. La estructura remachada del gabinete aumenta la durabilidad y reduce los efectos de la vibración en el relé.

RELÉ SELLADO HERMÉTICAMENTE SERIE 750H

Código: SERIE 750H - DWYER
Valorado con 0 de 5

El relé electromecánico sellado herméticamente serie 750H está diseñado para ser usado en sitios peligrosos Clase I División 2. Los contactos con destellos de oro se utilizan como protección anticorrosiva en aplicaciones de corriente/voltaje bajos. Los conectores de 8 y 11 pines permiten una instalación rápida y sencilla del relé tanto sobre una superficie como en un riel DIN. 

RELÉ DE RETARDO DE TIEMPO MONTABLE EN RIEL DIN SERIE 820

Código: SERIE 820 - DWYER
Valorado con 0 de 5

Los relés de retardo de tiempo montable en riel DIN serie 820 pueden configurarse de acuerdo con 10 funciones temporales diferentes. Los LED brillantes de color rojo y verde indican que si se disparó la entrada o si la salida está activa. Para mayor exactitud, existen 10 escalas temporales y un potenciómetro de ajuste preciso que permite realizar ajustes hasta de 0.1 segundos. La serie 820 se puede instalar directamente en un riel DIN a través de las aletas de montaje incorporadas.