Mostrando los 9 resultados

410761-00

Código: 410761-00
Valorado con 0 de 5

Actualizado: 2024-01-18

Series PS Pressure Snubber

Código: Series PS Pressure Snubber
Valorado con 0 de 5

Actualizado: 2024-01-18

The Series PS Pressure Snubber is designed to protect pressure instrumentation by
dampening surges and pulsations and assuring steady average pressure readings.
Snubbers are available in a variety of pore sizes for use with gases, water, and oils.




California Residents: Click Here for Proposition 65 WARNING.

Model A-464 Flush Mount Kit for Magnehelic® Gage

Código: Model A-464 Flush Mount Kit for Magnehelic® Gage
Valorado con 0 de 5

Actualizado: 2024-01-18

Model A-465 Flush Mount Space Pressure Sensor

Código: Model A-465 Flush Mount Space Pressure Sensor
Valorado con 0 de 5

Actualizado: 2024-01-18

Gage Tubing Accessories

Código: Gage Tubing Accessories
Valorado con 0 de 5

Actualizado: 2024-01-18

Clear PVC tubing is easily inspected and is therefore best for test applications where a possibility of fluid entering the tubing exists.
Rubber tubing has less tendency to kink in storage and occupies less space, thus is best for portable work.
Aluminum tubing is recommended for permanent installations.
Flexible double column tubing is used with Mark II Manometers and the Wind Speed Indicator.
Norprene® tubing is useful in a wide range of temperatures from -75 to 275°F (-60 to 135°C)and will not weaken after long term exposure to heat and ozone.
Flexible colored vinyl tubing is quickly distinguishable in applications where more than one line is required aiding installation.
Black plenum fire retardent polyethylene tubing meets NFPA standard 90A for installation in air-conditioning and ventilating plenum spaces; also used in building automation systems.

Static Pressure Tips & Accessories

Código: Static Pressure Tips & Accessories
Valorado con 0 de 5

Actualizado: 2024-01-18

These sensors are for use with manometers, Magnehelic® gages, pressure switches, and other controllers to pick up or sense static pressure drop across air filters and cooling coils, blower input, discharge pressures, etc. The angled tips shown have 4\" insertion depth. Each has four radially drilled .0040\" sensing holes. All except Model A-3003 mount in 3/8\" hole in duct. For portable use, a magnet holds No. A-3003 in place. No. A-3005 is used where a very low actuation or sensing point is required on a pressure switch or gage or where response time is critical. No. A-307 and A-3008 are suitable for use in low-velocity systems or where the need for accuracy is less critical.

Model A-286 Magnehelic® Gage Panel Mounting Flange

Código: Model A-286 Magnehelic® Gage Panel Mounting Flange
Valorado con 0 de 5

Actualizado: 2024-01-18

The A-286 Magnehelic® Gage Panel Mounting Flange can be used on any Dwyer Instruments gage that possesses a 4-1/2\" (115 mm) diameter housing. The flange is secured to the gage behind its bezel with three set screws. The set screws hold the gage tight in place. The gage/flange can then be quickly attached to a surface or panel with a drill and the supplied mounting screws. The flange\'s three mounting holes follow the industry standard mounting pattern. The flange is made of a robust plastic composite and comes with three pre-installed set screws, an Allen wrench for tightening and three flange mounting screws.

Series A-170 316 Stainless Steel Siphons

Código: Series A-170 316 Stainless Steel Siphons
Valorado con 0 de 5

Actualizado: 2024-01-18

The Series A-170 316 Stainless Steel Siphons protect pressure instruments in high
temperature applications. Water held in the 180° coil prevents steam from contacting
the instrument. Constructed with 316 stainless steel, the A-170 siphons offer the best
resistance to corrosion, high temperature, and pressure. They are ideal for use with
pressure gages and instrumentation where the process media temperature exceeds
the rating of the instrument. The male NPT connection allows for easy installation and
secure attachment.

Series A-169 Carbon Steel Siphons

Código: Series A-169 Carbon Steel Siphons
Valorado con 0 de 5

Actualizado: 2024-01-18

The Series A-169 Carbon Steel Siphons protect pressure instruments in high temperature applications. Water held in the 180° coil prevents steam from contacting the instrument. Constructed with carbon steel, the A-169 siphons can withstand high temperature and pressure. They are ideal for use with pressure gages and instrumentation where the process media temperature exceeds the rating of the instrument. The male NPT connection allows for easy installation and secure attachment.