Series 1227 Dual Range Flex-Tube® U-Inclined Manometer
Actualizado: 2024-01-04
The Series 1227 Dual Range Flex-Tube® U-Inclined Manometers are versatile, lowcost manometers that can be used to read high-range pressure on the right leg or
as an inclined manometer to read low-range pressure on the bottom leg. It is made
of a sturdy, clear plastic and offers direct readings as a U-tube or an inclined gage.
Magnetic clips are attached to the unit to hold it in position on any steel duct surface
and instructions are conveniently printed directly on the scale. See the Support Library tab for Safety Data Sheets.
California Residents: Click Here for Proposition 65 WARNING.
Series 1211/1212 Slack Tube® Manometers
Actualizado: 2024-01-04
The Series 1211 Slack Tube® Manometer is as accurate as the finest laboratory “U° gages, but is designed to roll up compactly for easy carrying. These manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches.The Model 1212 Gas Pressure Kit comes supplied with a 1211-16 Slack Tube® Manometer, carrying case, necessary tubing, and connection fittings for checking gas pressures in virtually all gas appliances. See the Support Library tab for Safety Data Sheets.
Series 100 Durablock® Solid Plastic Portable Gage
Actualizado: 2024-01-04
Dwyer® Series 100 Durablock® Solid Plastic Portable Manometers are precision instruments in inclined and vertical (well-type) styles for the measurement of static pressure, vacuum or differential pressure. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer\'s years of experience in the fabrication of acrylic instruments.
Series 1221/1222/1223 Flex-Tube® U-Tube Manometer
Actualizado: 2024-01-04
Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple \"U\" Tube with the durability of tough, long-lasting plastic construction. These inexpensive manometers measure positive, negative and differential pressures. Columns are of .375\" O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.
Series 200 & 300 Durablock® Solid Plastic Stationary Gage
Actualizado: 2024-01-04
Dwyer® Series 200 & 300 Durablock® Solid Plastic Stationary Gages, or draft gages,are offered in inclined and vertical (well-type) styles for highly accurate laboratory
or general industrial service, for measurement of low range gas and air pressures,
positive, negative or differential. To assure the accuracy required in instruments of this
type, all machining of bores and wells is to the highest standards of precision backed
by Dwyer’s years of experience in the fabrications of acrylic instruments.
Series 1230/1235 Flex-Tube® Well-Type Manometers
Actualizado: 2024-01-04
Dwyer® Series 1230 & 1235 Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Over-pressure safety traps assure protection against loss of fluid. Scales are adjusted with quick-acting positive mechanism. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5\" Hg (68\" w.c.).(Note: Red gage fluid included with -D style manometer.)
Series 420 Durablock® Inclined/Vertical Manometer
Actualizado: 2024-01-04
Dwyer® Series 420 Inclined-Vertical Manometer are extremely accurate instruments designed and made especially for precision measurement of low differential pressures in laboratory and test applications. The inclined range bore has a length of 20\" to provide ample multiplication of indicating fluid movement in this critical lower part of the range.
Series 250-AF Inclined Manometer Air Filter Gages
Actualizado: 2024-01-04
Dwyer® Durablock® Series 250-AF Inclined Manometer Air Filter Gages are precisionmachined 1\" thick solid acrylic plastic, virtually unbreakable and free of distortion. The
fluid bore is precision drilled to ±.00002\" to assure life-long accuracy. A glass spirit level
is built into the body and encapsulated to prevent damage or tampering. The scale is
mirror polished chrome plated brass to assure parallax free reading by alignment of
the meniscus with its reflection. Safety traps are incorporated in the body to prevent
loss of fluid due to pressure surges. Red and green signal flags indicate clearly when
a filter change is necessary. Gages are suitable for use in ambient temperatures of -20
to 150°F. Connection fittings are positively sealed but easily removed for zeroing or
addition of fluid.
Series Mark II Molded Plastic Manometers
Actualizado: 2024-01-04
Series Mark II Molded Manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements. Included with each Mark II manometer are two tubing connectors for 1/8\" pipe or sheet metal ducts, two mounting screws, 1 ounce bottle of indicating fluid, red and green pointer flags and complete instructions.The Model 25 also includes 8\' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage fluid in transit.
The Model 40 contains two 4-1/2\' lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps. See the Support Library tab for Safety Data Sheets.
