Mostrando 1–12 de 30 resultados

Series 475 Intrinsically Safe Handheld Digital Manometer

Código: Series 475 Intrinsically Safe Handheld Digital Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 475 Handheld Digital Manometer measures positive, negative, or differential pressures of air and natural gases in ranges from 1 in w.c. (0.249 kPa) to 150 psid (10.34 bar). The dual push pads on the front panel control the on/off, auto zero, and pressure unit selection, allowing for simple operation with no set up needed. When used with a Dwyer® Pitot tube, the Series 475 can also be used as an air velocity gage.

Series 476A Single Pressure & Series 478A Digital Manometer

Código: Series 476A Single Pressure & Series 478A Digital Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 476A Single Pressure Differential Pressure Digital Manometer can be
used to measure low pressures from -20 to 20 in w.c. with ±1.5% FS accuracy.

The Series 478A Single Pressure Differential Pressure Digital Manometer can
be used to measure positive, negative, or differential pressures with ±1.5% full-scale
accuracy. Both units are constructed of an extruded aluminum case for exceptional
durability.

Series HM35 Precision Digital Pressure Manometer

Código: Series HM35 Precision Digital Pressure Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series HM35 Precision Digital Pressure Manometer is designed to reliably
measure and log absolute pressure, differential pressure, or gage pressure with
up to 0.005% accuracy. The data logging function can store up to 10,742 readings
and transmit the readings to a PC through an IR serial port. The large display can
graphically display trends in the data as well as peaks and valleys. Calibration certification included.

Series 477AV Handheld Digital Manometer

Código: Series 477AV Handheld Digital Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 477AV Handheld Digital Manometer is now available with pressure, flow, and velocity measurements along with a number of other convenient features. The built-in air velocity and flow calculations provide accuracy and conserve time and error associated with manual calculations. Also featured on this unit are adjustable zero and span values for calibrating in the field, as well as a damping feature to compensate for the fluctuating of readings.

Series 477B Handheld Digital Manometer

Código: Series 477B Handheld Digital Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 477B Handheld Digital Manometers are versatile, hand-held, battery operated manometers available in several basic ranges from 0-20 in w.c. up to 100 psi. All models measure either positive, negative or differential pressures with ±0.10% of full scale accuracy. You can select from up to seven common English and metric pressure units so conversions are not necessary. A memory function allows storage of up to 40 readings for later recall and a backlight provides auxiliary lighting for hard-to-see locations. Also standard is a hold feature; plus both visual and audible
overpressure alarms.

Series 490A Hydronic Differential Pressure Manometer

Código: Series 490A Hydronic Differential Pressure Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 490A Hydronic Differential Pressure Manometers are versatile, handheld, battery operated manometers available in several basic ranges for positive or positive differential pressure measurement and can tolerate most liquid media compatible with 316LSS. A new feature added to the Series 490A is a field adjustable damping, which allows the user to choose the level of display averaging rate corresponding to the fluctuation level common in many applications.

Series 1227 Dual Range Flex-Tube® U-Inclined Manometer

Código: Series 1227 Dual Range Flex-Tube® U-Inclined Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 1227 Dual Range Flex-Tube® U-Inclined Manometers are versatile, low
cost manometers that can be used to read high-range pressure on the right leg or
as an inclined manometer to read low-range pressure on the bottom leg. It is made
of a sturdy, clear plastic and offers direct readings as a U-tube or an inclined gage.
Magnetic clips are attached to the unit to hold it in position on any steel duct surface
and instructions are conveniently printed directly on the scale. See the Support Library tab for Safety Data Sheets.



California Residents:  Click Here for Proposition 65 WARNING.

Series 1211/1212 Slack Tube® Manometers

Código: Series 1211/1212 Slack Tube® Manometers
Valorado con 0 de 5

Actualizado: 2024-01-04

The Series 1211 Slack Tube® Manometer is as accurate as the finest laboratory “U° gages, but is designed to roll up compactly for easy carrying. These manometers cover a wide range of pressure readings from 4-0-4 inches up to 60-0-60 inches.

The Model 1212 Gas Pressure Kit comes supplied with a 1211-16 Slack Tube® Manometer, carrying case, necessary tubing, and connection fittings for checking gas pressures in virtually all gas appliances. See the Support Library tab for Safety Data Sheets.

Series 100 Durablock® Solid Plastic Portable Gage

Código: Series 100 Durablock® Solid Plastic Portable Gage
Valorado con 0 de 5

Actualizado: 2024-01-04

Dwyer® Series 100 Durablock® Solid Plastic Portable Manometers are precision instruments in inclined and vertical (well-type) styles for the measurement of static pressure, vacuum or differential pressure. To assure the accuracy required in instruments of this type, all machining of bores and wells is to the highest standards of precision backed by Dwyer\'s years of experience in the fabrication of acrylic instruments.

Series 1221/1222/1223 Flex-Tube® U-Tube Manometer

Código: Series 1221/1222/1223 Flex-Tube® U-Tube Manometer
Valorado con 0 de 5

Actualizado: 2024-01-04

Dwyer® Flex-Tube® U-Tube Manometers combine the inherent accuracy of the simple \"U\" Tube with the durability of tough, long-lasting plastic construction. These inexpensive manometers measure positive, negative and differential pressures. Columns are of .375\" O.D. flexible and shatter proof clear butyrate tubing. They are easily accessible for cleaning. Indicating tube is backed by white scale channel to provide maximum color contrast. Scales are extruded high impact polystyrene plastic, formed to hold columns in perfect alignment. Stark white scales have graduations and numbers silkscreen-printed in black for maximum legibility.

Series 200 & 300 Durablock® Solid Plastic Stationary Gage

Código: Series 200 & 300 Durablock® Solid Plastic Stationary Gage
Valorado con 0 de 5

Actualizado: 2024-01-04

Dwyer® Series 200 & 300 Durablock® Solid Plastic Stationary Gages, or draft gages,
are offered in inclined and vertical (well-type) styles for highly accurate laboratory
or general industrial service, for measurement of low range gas and air pressures,
positive, negative or differential. To assure the accuracy required in instruments of this
type, all machining of bores and wells is to the highest standards of precision backed
by Dwyer’s years of experience in the fabrications of acrylic instruments.

Series 1230/1235 Flex-Tube® Well-Type Manometers

Código: Series 1230/1235 Flex-Tube® Well-Type Manometers
Valorado con 0 de 5

Actualizado: 2024-01-04

Dwyer® Series 1230 & 1235 Flex-Tube® Well Type Manometers are designed to meet the need for a direct reading single column instrument providing highly accurate pressure readings; positive, negative or differential. Unlike other makes, Dwyer manometers have no hidden wells or packing glands. These instruments are constructed of shatter-proof clear plastic tubing permanently bonded to well assemblies with leak-proof glued joints. Well assemblies are precisely machined from solid acrylic plastic. Over-pressure safety traps assure protection against loss of fluid. Scales are adjusted with quick-acting positive mechanism. These manometers are rated to 100 psig (6.89 bar). Not recommended for vacuum service beyond 5\" Hg (68\" w.c.).
(Note: Red gage fluid included with -D style manometer.)