Mostrando los 6 resultados

Series PRV Pneumatic Roller Vibrator

Código: Series PRV Pneumatic Roller Vibrator
Valorado con 0 de 5

Actualizado: 2024-01-18

Series PRV Pneumatic Roller Vibrators have a high vibration frequency feature that can prevent material jams in pipe delivery. It can also be applied for bridge-break or concrete injection operation conditions. The special aluminum body is equipped with a roller and ring with multi-nozzles. It is tightly closed by plastic side covers. Vibration is caused when the roller pushed by compressed air runs in a rotary motion to produce centrifugal force.

Series APV Piston Vibrator

Código: Series APV Piston Vibrator
Valorado con 0 de 5

Actualizado: 2024-01-18

Series APV-C Piston Vibrators are air cushioned to provide low noise. This makes it suitable for quiet area applications. It is a good solution to prevent clogs on tank walls and material delivery problems. It can also be applied on vibrating separators and conveyors.

Series BPV Pneumatic Ball Vibrator

Código: Series BPV Pneumatic Ball Vibrator
Valorado con 0 de 5

Actualizado: 2024-01-18

Series BPV Pneumatic Ball Vibrators are the best choice for bridge-break in thin walls and small tanks. This model can be used in vibrating separators, vibrating conveyors, and against electroplating build-up. It can also be used on material compacted while packing or sand compacted while molding. The aluminum body is equipped with a steel ring and ball inside that is tightly closed by plastic side covers. Vibration is caused when the internal ball, pushed by compressed air, runs in a rotary motion to produce centrifugal force.

Series IPV Air Hammer

Código: Series IPV Air Hammer
Valorado con 0 de 5

Actualizado: 2024-01-18

Series IPV Air Hammer (single impact model) focuses on a limited target. Other equipment of the target is minimally affected by it. It is often applied onto a pipe or clean elbow in a tank filled with humidity or low specific gravity material.

Series PTV Pneumatic Turbine Vibrator

Código: Series PTV Pneumatic Turbine Vibrator
Valorado con 0 de 5

Actualizado: 2024-01-18

Series PTV Pneumatic Turbine Vibrators are the best choice of high vibration frequency types for a low noise environment. It is usually installed on a vibrating separator, conveyor, automatic arrangement machine, packing machine, or filling machine. The vibration is produced by centrifugal force which arises from the imbalance of movement when compressed air impacts the tangent of the turbine to make it move. The operation noise is low because of ball bearing supports on the running turbine.

Series EBV Electric Bin Vibrator

Código: Series EBV Electric Bin Vibrator
Valorado con 0 de 5

Actualizado: 2024-01-18

The Series EBV Electric Bin Vibrator incorporates adjustable force features without creating irritating noise. The low amperage draw at 120V reduces power consumption and makes the vibrators usable in any application. The EBV eliminates drawbacks associated with non-adjustable constant force units. The conventional fix force units are sized with narrow operating limits and may not move material from bins or pack material in containers if the moisture content changes. The adjustable force feature increases application flexibility; reducing equipment downtime and labor expense. The EBV is capable of running continuously at 100% force output without overheating or mechanical damage.