Mostrando 1–36 de 39 resultados

Series FPCA Flow Power/Controls Accessories

Código: Series FPCA Flow Power/Controls Accessories
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series FPCA Flow Power Control Accessories include mounting kits, power
converters, and power supplies for compatible flow meters. These accessories simplify
installation by offering meter and wall mounting options. Furthermore, power input and
supply are no longer an issue with the power converter and dual power supply. The WMK
can be used to mount Series BAT, RTI, or PWD on Series PDWS. The MMK can be used
to mount either Series BAT or RTI to a wall with the use of Series EFS2, IEFS, PDWS,
IPFS, TBS, or FLMG. Model PWC1 can be used with Series PDW, EFS2, or IEFS to
convert 115 VAC to 25 VDC. Model PWC2 can be used with Series EFS2, IEFS, PDWS,
IPFS, and TBS to convert 115 VAC to 12/24 VDC and provide dual power output for use
with Series BAT and RTI.

Model SPK Solar Panel Kit

Código: Model SPK Solar Panel Kit
Valorado con 0 de 5

Actualizado: 2024-02-17

The Model SPK Solar Panel makes it possible to use Dwyer flowmeters in remote
applications where a reliable source of electricity is not available or practical. The SPK is
intended for use with a standard 12V, 22 to 33 amp-hour sealed lead acid battery (not
included). It comes standard with a charge controller and corrossion-resistant mounting
hardware. The SPK can also be used to provide up to a 40-day back-up power supply for
periods of darkness.

Series PFT Paddlewheel Flow Sensor

Código: Series PFT Paddlewheel Flow Sensor
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40\" and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models are a square wave output signal with frequency proportional to the flow velocity and the 4 to 20 mA models have a linear output of the velocity with 4 mA equal to 0 ft/s and 20 mA equal to 25 ft/s.



California Residents: Click Here for Proposition 65 WARNING.

Series UFB Ultrasonic Flowmeter Set

Código: Series UFB Ultrasonic Flowmeter Set
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series UFB Ultrasonic Flowmeter Set utilizes the transit-time difference for
measuring flow rates in pipes non-invasively. This is the permanent model, allowing the
user to mount the converter on a surface or pipe. The easy-to-use compact and lightweight
design is intended for mechanical devices using ideally homogeneous liquids that contain no
air pockets. The Series UFB comes with a sturdy IP65 rating, protecting it from dust and
direct water contact. The Series UFB has 4 to 20 mA and pulse output capabilities.

Series PUB Portable Ultrasonic Flowmeter Kit

Código: Series PUB Portable Ultrasonic Flowmeter Kit
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series PUB & PUF Portable Ultrasonic Flowmeter Kits utilize the transit-time
difference for measuring flow rates in pipes non-invasively. They are compact and
lightweight instruments incorporating the latest electronics and signal processing
technologies, realizing high performance and easy operation. These devices are perfect for
on-the-go flow monitoring, capable of 20 hours continuous operation with built-in,
rechargeable battery. The PUB comes with a rugged carrying case with molded foam
inserts while the PUF boasts an IP67 rated case to hold and protect all equipment
conveniently. Their screens offer easy to read text with convenient backlight for visual
comfort. The efficient layout of the function keys adds to these units’ easy to use
programming. These series offer analog as well as a pulsed outputs.

Series PUF Portable Ultrasonic Flowmeter Kit

Código: Series PUF Portable Ultrasonic Flowmeter Kit
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series PUF Portable Ultrasonic Flowmeter Kit utilizes the transit-time
difference for measuring flow rates in pipes non-invasively. It is a compact and lightweight
instrument incorporating the latest electronics and signal processing technologies, realizing
high performance and easy operation. This device is capable of 20 hours continuous
operation with its built-in battery. The PUF comes with an IP67 rated carrying case with
molded foam inserts to hold and protect all equipment against dust and water. The screen
offers easy to read text with a convenient backlight for visual comfort. The efficient layout
of the function keys add to this unit\'s easy to use programming. The unit comes with RS232
and USB connections to allow for easy connection to any personal computer or printer.

Series TUF Ultrasonic Energy Meter

Código: Series TUF Ultrasonic Energy Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series TUF Ultrasonic Energy Meter is a highly accurate and stable energy meter that utilizes ultrasonic technology to measure heating and cooling energy consumption. The Series TUF is a compact meter with a flowmeter and energy calculator in one, making it great for installation on chillers and boilers.

Series UFM2 Compact Ultrasonic Flowmeters

Código: Series UFM2 Compact Ultrasonic Flowmeters
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series UFM2 Compact Ultrasonic Flowmeters are economical, clamp-on,
ultrasonic flowmeters. The UFM2 implements the transit-time difference to measure
flow rates in pipes and can measure velocity and flow in pipes with outside diameters
ranging from 3/4 to 7\" (25 to 180 mm). This model comes with a volume pulse and
4-20 mA flow rate output.

Series TFP-LP Liquid Turbine Flow Meter

Código: Series TFP-LP Liquid Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

Series TFP-LP Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. Couple this unit with a Series TM2 Flow Totalizer for a remote flow monitoring display. A power adapter or mating cable assembly is required for operation.

Series TFP-LI Liquid Turbine Flow Meter

Código: Series TFP-LI Liquid Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

Series TFP-LI Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Series TFM-LI Liquid Turbine Flow Meter

Código: Series TFM-LI Liquid Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

Series TFM-LI Liquid Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Series TFM-LP Liquid Turbine Flow Meter

Código: Series TFM-LP Liquid Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series TFM-LP Liquid Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC and pulsed output signal for recording and data logging. A power adapter or mating cable assembly is required for operation

Series TFP-GI Gas Turbine Flow Meter

Código: Series TFP-GI Gas Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

Series TFP-GI Gas Turbine Flow Meters are suitable for a wide variety of industrial, commercial, and laboratory flow applications. These meters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A 3-1/2 digit LCD informs the user of the actual flow rate. A power adapter or mating cable assembly is required for operation.

Series TFP-GV Gas Turbine Flow Meter

Código: Series TFP-GV Gas Turbine Flow Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series TFP-GV Gas Flowmeters utilize a turbine wheel and electro-optical detection to convert flow rates into a linear 0 to 5 VDC output signal for recording and data logging. A power adapter or mating cable assembly is required for operation.

Series HFT In-Line Flow Transmitters

Código: Series HFT In-Line Flow Transmitters
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series HFT In-Line Transmitters provide continuous monitoring of flow rate levels via a direct reading in-line flowmeter with electronics to provide proportional 4 to 20 mA, 0 to 5 and 1 to 5 VDC analog outputs. Calibration Option available under Accessories.



California Residents: Click Here for Proposition 65 WARNING.

Series CAM Compressed Air Meter

Código: Series CAM Compressed Air Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series CAM Compressed Air Meter operates by the calorimetric measuring principle to detect the standard volume flow of operating compressed air. It is designed specifically to evaluate the current flow rate and the current consumed quantity in compressed air systems. With an easily programmable digital display, this unit offers a quick, accurate readout. The Series CAM is constructed of high-grade materials and is virtually maintenance free.

Series MFS & MFS2 Magnetic Inductive Flow Sensors

Código: Series MFS & MFS2 Magnetic Inductive Flow Sensors
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series MFS & MFS2 Magnetic Inductive Flow Sensors are compact, 316 SS
body, in line flowmeters with pulse and optional analog 4-20 mA output. It is available in
a variety of flow ranges from 0.25 to 52.8 GPM (1 to 200 LPM) and process connection
sizes of 1/2\" and 1\" NPT.

Series UBT Clamp-On Ultrasonic Thermal Energy Meter

Código: Series UBT Clamp-On Ultrasonic Thermal Energy Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series UBT Clamp-On Ultrasonic Thermal Energy Meter is an economical
clamp-on ultrasonic heat meter. It is an ultrasonic alternative to the traditional inline
thermal energy meters. The series uses temperature sensors for energy measurement
and ultrasonic waves with time differentials for flow measurement.

Series IEF Insertion Electromagnetic Flow Transmitter

Código: Series IEF Insertion Electromagnetic Flow Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

A-IEF Remote Display is NOW AVAILABLE!


The Series IEF Insertion Electromagnetic Flow Transmitter is an adjustable insertion flowmeter featuring electromagnetic technology that accurately and reliably measures fluid velocity in addition to providing several continuous signal outputs. This series is specifically designed to offer superior performance paired with simple installation and use. One unit is adjustable to fit pipe sizes from 4 to 36\" (1002 to 914 mm), and offers several output options including selectable BACnet MS/TP or Modbus® RTU communications protocol over 2-wire RS-485 in addition to the standard analog, frequency and alarm outputs.

Series A-IEF Remote Display for Series IEF and IEFB

Código: Series A-IEF Remote Display for Series IEF and IEFB
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series A-IEF Remote Display can be installed almost anywhere near a Series IEF flow transmitter or Series IEFB thermal energy meter. Both the indicator display (A-IEF-IDSP-RM) and the full functional display (A-IEF-FDSP-RM) have a maximum display cable length of 100 ft (30 m) to permit easy viewing of flow readings. The full functional
display allows for convenient adjustment of configuration settings and allows the user to save the IEF or IEFB configuration settings to a computer for printing.

Series SFI-100T Sight Flow Indicator/Transmitter

Código: Series SFI-100T Sight Flow Indicator/Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series SFI-100T Sight Flow Indicators & Transmitters is a low cost and durable flow transmitter that combines our popular 100 Series Sight Flow Indicator with our A-711T output sensor for visual and remote monitoring of flow. The A-711T output sensor has two pulsed voltage signals with one providing a 5 VDC pulse, the other a pulse of the input supply voltage used, ranging from 8 to 28 VDC and a pulsed output with a frequency change proportional to the flow rate.

California Residents:  Click Here for Proposition 65 WARNING.

Series SF Sight Flow Transmitter

Código: Series SF Sight Flow Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series SF Sight Flow Transmitter is a Series of sight indicators which can display flow or contents of pipelines and provide an analog 4 to 20 mA signal proportional to the flow rate. It is available with a 316 SS or clear polycarbonate cover.

Series SFI-800 Sight Flow Indicator/Transmitter

Código: Series SFI-800 Sight Flow Indicator/Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series SFI-800 Sight Flow Indicators & Transmitters are a low cost, durable rotor style flow indicator with optional Hall Effect magnetic output packages to combine visual confirmation of flow with optional remote flow monitoring. There are three output sensors available, the A-711 offering two pulsed voltage signals proportional to flow rate, the A-712 which outputs a linear 1 to 10 VDC signal proportional to flow rate, and the A-713 which offers two programmable open collector switch outputs.
The Model A-711 is a unique and patent pending sensor that outputs two pulsed voltage signals with one providing a 5 VDC pulse and the other a pulse of the input supply voltage used, ranging from 8 to 18 VDC.
The Model A-712 is a sensor that outputs a linear 1 to 10 VDC signal proportional to flow rate.
The Model A-713 is a sensor with two programmable open collector switch outputs with one output closed above the set point and the other output closed below the set point ideal for low flow or high flow indication.

Series DFMT Digital Paddlewheel Flow Transmitter

Código: Series DFMT Digital Paddlewheel Flow Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series DFMT Digital Paddlewheel Flow Transmitter provides instantaneous, as
well as totalizing flow monitoring. The unit offers a user selectable 4 to 20 mA or pulse output with compact display.

Series DFMT2 Digital Paddlewheel Flow Transmitter

Código: Series DFMT2 Digital Paddlewheel Flow Transmitter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series DFMT2 Remote Digital Paddlewheel Flow Transmitter is a two piece
digital flow transmitter that provides instantaneous, as well as totalizing flow monitoring.
The two piece design allows the user to separate the control panel from the application,
making it ideal for industrial use in reverse osmosis water purifying systems and any other
applications where space is limited. The large backlit display makes navigating through
the menu structure simple. The Series DFMT2 uses high accuracy, industry proven
paddlewheel technology, offers a user selectable 4 to 20 mA or pulse output, and has a
corrosion resistant PVDF sensor giving it a long operation life. Users can reset the totalizer
at any time and set a security password protecting the system settings from unauthorized
changes.

Series IEFB Insertion Thermal Energy Meter

Código: Series IEFB Insertion Thermal Energy Meter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series IEFB is a field-adjustable insertion thermal energy meter that uses
electromagnetic technology to accurately and reliably measure fluid velocity and
energy consumption. The high accuracy IEFB is adjustable to fit pipe sizes from 4
to 10\" (100 to 250 mm), while the standard accuracy IEFB fits pipe sizes 4 to 36\"
(100 to 900 mm). The IEFB incorporates a temperature meter and a calculator into a
single unit. The LCD display provides clear readings of the meter’s values, including
temperature and energy consumption, making it ideal for installation on chillers,
boilers, and other heating and cooling applications. The high measuring accuracy and
long lifetime keeps annual operating costs at a minimum. In addition, it offers several
output options, including selectable BACnet MS/TP or Modbus® RTU communications
protocol over 2-wire RS-485 and standard analog, frequency, and alarm outputs.

Series CP/CN/CT/CX CoolPoint® Vortex Shedding Flowmeter

Código: Series CP/CN/CT/CX CoolPoint® Vortex Shedding Flowmeter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series CP/CN/CT/CX Coolpoint® Vortex Shedding Flowmeter is made for
water, water/glycol mixtures, or low viscosity fluids. These units contain no moving
parts to clog or wear, allowing for minimal maintenance in the field. This series has two
versions: a 3-wire version, where power is supplied separate from the 4-20 mA output,
and a 2-wire loop-powered version. The 3-wire version is equipped with a solid state
relay that can be configured in the field to be either an alarm or a pulse output, an LED
display which allows the user to choose between selectable engineering units (GPM or
LPM), and a high temperature option. The alarm on this version is selectable between
a high or low alarm (NO or NC) and the pulse output option is set at a frequency at a
specific pulses per gallon. The 2-wire option allows for operation in an intrinsically safe
mode only when used in conjunction with an approved intrinsic safety barrier meeting
required entity parameters. This version does not come with a display or relay contacts
to allow for this operation mode.

Series PI Piston In-Line Variable Area Flowmeter

Código: Series PI Piston In-Line Variable Area Flowmeter
Valorado con 0 de 5

Actualizado: 2024-02-17

The Series PI Piston In-Line Variable Area Flowmeter is a series of mechanical piston variable area flow meters with visual and electronic output options. The Series PI is offered with inscribed scale displays via pointer or numeric digital LCD options. It offers mechanical switch output options and electronic output options such as 4-20 mA analog output, and HART® protocol. It is available in pipe sizes 1/4\" to 1\" (8 to 25 mm) and flows of 0.25 to 30 GPM (5 to 100 LPM) for liquids with viscosity up to 650 centistokes.

Series PFT Paddlewheel Flow Sensor

Código: Series PFT Paddlewheel Flow Sensor
Valorado con 0 de 5

Actualizado: 2024-01-01

The Series PFT Insertion Paddlewheel Flowmeters are used to monitor liquid flow rates in pipes from 1-1/2 to 40\" and is available in brass or 316 SS body. The unit outputs a frequency proportional pulsed or 4 to 20 mA output. The pulse models are a square wave output signal with frequency proportional to the flow velocity and the 4 to 20 mA models have a linear output of the velocity with 4 mA equal to 0 ft/s and 20 mA equal to 25 ft/s.



California Residents: Click Here for Proposition 65 WARNING.

TRANSMISOR DE FLUJO EN LÍNEA SERIE HFT – DWYER

Código: SERIE HFT - DWYER
Valorado con 0 de 5

Código Interno:

Indicación local de flujo, montaje sin restricciones, salida de 4-20 mA, 0-5 V y 1-5 V.

La serie HFT combina un medidor de flujo HF de lectura directa con componentes electrónicos para proveer una salida analógica proporcional de 4-20 mA, 0-5 y 1-5 VCC. Use la salida para controlar dispositivos de adquisición de datos, medidores o tarjetas de entradas analógicas. Todo el conjunto está albergado dentro de un robusto gabinete NEMA 4X de aluminio fundido. La unidad puede instalarse en aplicaciones al aire libre o en ambientes agrestes, donde se requieren sellos herméticos a líquidos. El transmisor de flujo no requiere tubería recta de entrada o salida y puede montarse con cualquier orientación.

MEDIDOR DE FLUJO DE TURBINA PARA LÍQUIDOS SERIE TFP-LP – DWYER

Código: SERIE TFP-LP - DWYER
Valorado con 0 de 5

Código Interno:

Cuerpo de PPS, salidas de 0 a 5 VCC y de pulsos

Los medidores de flujo de turbina para líquidos serie TFP-LP son apropiados para una extensa gama de aplicaciones de flujo industriales, comerciales y de laboratorio. Estos medidores utilizan una rueda de turbina y un detector electroóptico para convertir caudales a una señal de salida lineal de 0 a 5 VCC para fines de registro de datos. Utilice esta unidad en combinación con un totalizador de flujo serie TM2 para la presentación de monitoreo de flujo remoto. Se requiere un adaptador de alimentación eléctrica o un conjunto de cable acoplador para su funcionamiento.

MEDIDOR DE FLUJO DE TURBINA PARA LÍQUIDOS SERIE TFM-LP – DWYER

Código: SERIE TFM-LP - DWYER
Valorado con 0 de 5

Código Interno:

Cuerpo de acero inoxidable 316, salidas de 0 a 5 VCC y de pulsos

Los medidores de flujo de turbina para líquidos serie TFM-LP son apropiados para una extensa gama de aplicaciones de flujo industriales, comerciales y de laboratorio. Estos medidores utilizan una rueda de turbina y un detector electroóptico para convertir caudales a una señal de salida lineal de 0 a 5 VCC para fines de registro de datos. Utilice esta unidad en combinación con un totalizador de flujo serie TM2 para la presentación de monitoreo de flujo remoto. Se requiere un adaptador de alimentación eléctrica o un conjunto de cable acoplador para su funcionamiento.

MEDIDOR DE FLUJO DE TURBINA PARA GAS SERIE TFP-GI – DWYER

Código: SERIE TFP-GI - DWYER
Valorado con 0 de 5

Código Interno:

Cuerpo de PPS, salida de 0 a 5 VCC, pantalla LCD indicadora.

Los medidores de flujo de turbina para gas serie TFP-GI son apropiados para una extensa gama de aplicaciones de flujo industriales, comerciales y de laboratorio. Estos medidores utilizan una rueda de turbina y un detector electroóptico para convertir caudales a una señal de salida lineal de 0 a 5 VCC para fines de registro de datos. Una pantalla LCD de 3,5 dígitos informa al usuario del caudal actual. Se requiere un adaptador de alimentación eléctrica o un conjunto de cable acoplador para su funcionamiento.

MEDIDOR DE FLUJO DE TURBINA PARA GAS SERIE TFP-GV – DWYER

Código: SERIE TFP-GV - DWYER
Valorado con 0 de 5

Código Interno:

Cuerpo de PPS, salida de 0 a 5 VCC.

Los medidores de flujo de turbina para gas serie TFP-GV son apropiados para una extensa gama de aplicaciones de flujo industriales, comerciales y de laboratorio. Estos medidores utilizan una rueda de turbina y un detector electroóptico para convertir caudales a una señal de salida lineal de 0 a 5 VCC para fines de registro de datos. Utilice esta unidad en combinación con un totalizador de flujo serie FIV para la presentación de monitoreo de flujo remoto. Se requiere un adaptador de alimentación eléctrica o un conjunto de cable acoplador para su funcionamiento.

MEDIDOR DE AIRE COMPRIMIDO SERIE CAM – DWYER

Código: MEDIDOR DE AIRE COMPRIMIDO SERIE CAM - DWYER
Valorado con 0 de 5

Código Interno:

Estado constante y totales acumulados, salida PNP o de 4-20 mA.

El medidor de aire comprimido serie CAM utiliza el principio de medición calorimétrica para detectar el flujo de volumen estándar de aire comprimido operativo. Está diseñado específicamente para evaluar el caudal actual y la cantidad consumida actual en sistemas de aire comprimido. La unidad tiene una pantalla digital fácil de programar y presenta una lectura rápida y exacta. La serie CAM está hecha de materiales de alto grado y casi no requiere mantenimiento.

MEDIDOR DE FLUJO DE TURBINA PARA LÍQUIDOS SERIE TFM-LI – DWYER

Código: SERIE TFM-LI - DWYER
Valorado con 0 de 5

Código Interno:

Cuerpo de acero inoxidable 316, salida de 0 a 5 VCC, pantalla LCD indicadora.

Los medidores de flujo de turbina para líquidos serie TFM-LI son apropiados para una extensa gama de aplicaciones de flujo industriales, comerciales y de laboratorio. Estos medidores utilizan una rueda de turbina y un detector electroóptico para convertir caudales a una señal de salida lineal de 0 a 5 VCC para fines de registro de datos. Una pantalla LCD de 3,5 dígitos informa al usuario del caudal actual. Se requiere un adaptador de alimentación eléctrica o un conjunto de cable acoplador para su funcionamiento.