Mostrando 1–12 de 33 resultados

Termination Junction Box, Caja

Código: CB4
Valorado en 0 de 5
CAJA DE 4 CANALES
Marca: WILCOXON
para sensores remotos

Sensor de Vibracion, 100 mv/g

Código: 780A
Valorado en 0 de 5
COMPACT GENERAL ACCELEROMETER
Brand: WILCOXON
PURPOSE ACCELEROMETER
Sensitivity, ± 5%, 25°C 100 mV/g
Acceleration range 80 g peak
Amplitude nonlinearity 1%
Frequency response: 
± 5%..3 - 5,000 Hz
± 10%..1 - 9,000 Hz
± 3 Db.. 0.5 - 14,000 Hz
Resonance frequency 30 kHz
Transverse sensitivity, max 5% of axial
Temperature response: –55°C.. –20%
+120°C.. +10%
Power requirement: 
Voltage source: 18 - 30 VDC
Current regulating diode: 2 - 10 mA
Output impedance, max 100 Ω
Bias output voltage 12 VDC
Grounding case isolated, internally shielded
Temperature range –55° to +120°C
Vibration limit 500 g peak
Shock limit 5,000 g peak
Electromagnetic sensitivity, equiv. g, max 70 μg/gauss
Sealing hermetic
Base strain sensitivity, max 0.0002 g/μstrain
Sensing element design PZT, shear
Weight 62 grams
Case material 316L stainless steel
Mounting 1/4-28 UNF tapped hole
Output connector 2 pin, MIL-C-5015 style
Mating connector R6 type
Recommended cabling J10 / J9T2A

​ACCELEROMETER WITH INTEGRAL CABLE, 18 – 30 VDC

Código: 780FM-2-J88C
Valorado en 0 de 5
ACCELEROMETER WITH INTEGRAL CABLE
Brand: WILCOXON
Sensitivity, ±15%, 25°C 100 mV/g
Acceleration range 80 g peak
Resonance frequency 30 kHz
Transverse sensitivity, max 5% of axial
Voltage source 18 - 30 VDC
Current regulating diode 2 - 10 mA
 

HORN /STROBE RED

Código: 869STRR-N5
Valorado en 0 de 5
HORN /STROBE RED
Brand: EDWARDS SIGNAL
Voltage: 120 VAC
Lamp Color: Red
Lamp Type: Strobe
Flash Rate/Minute:60
dB @ 10 Ft.:90 dB
Mounting: Surface
Operating Currrent: 0.09 Amps
Operating Temp.: 32 to 120 Degrees F
Approvals: UL

PCC420 series 4-20mA sensors

Código: PCC420VP-20-R6
Valorado en 0 de 5
RMS and peak velocity
loop powered sensors
Brand: Wilcoxon
Model: PCC420VP-20-R6

Specification:
[PCC420]
4-20mA output (acceleration or velocity)
More compact housing than legacy PC420 models
Available with a 2-pin MIL 
[VP] calculated peak output, velocity
[20] 2.0 ips (50.8 mm/sec)
[R6] 2-pin, MIL-C-5015 style

PT580 Digital Vibration Switch

Código: PT580-000-011-30-01
Valorado en 0 de 5
PT580 Digital Vibration Switch
Brand: PVTVM - Usa
Model: PT580-000-011-30-01

[PT580] Model
Specifications 
Frequency Range: 
Internal sensor: 2 - 1,000 Hz 
External sensor: 2 - 2,000 Hz
Alarms: Dual alarms 
Dry-contact relay: 5A 230VAC/115VAC or 5A 30VDC 
Triac: 5A 230VAC. Optically Isolated, Standard NC 
Enclosure: Cast Aluminum
Environmental Rating: NEMA 4X(optional E-coating ), IP65
[0]  Alarms,  Dual SPDT Relays 
[0]   3/4” NPT 
[0]  Mounting Plate PT500-13
[0] With display (No Local Reset)
[1] Multiple approvals: 
CSA: Class I, Div 1, Groups B, C, D, T4 & T6 
 CERTIFICATE: 2079756 
ATEX: II 2G Ex db ⅡB+ H2 T4/T6 Gb 
T4@Ta= -52℃ to +100℃
 T6@Ta= -52℃ to +70℃
 DEKRA 16ATEX0003X 
IECEx: Ex db ⅡB+ H2 T4/T6 Gb 
 IECEx DEK 16.0002X 
PCEC: Ex d ⅡB+H2T4/T6 Gb 
CE Mar
[1] Outputs/   4-20mA
[30]  0 - 12.5 mm/s rms
[0]  Sensors , Internal accelerometer 
[1] Power Supply,  24VDC 

RMS and peak velocity loop powered sensors

Código: PC420VP-10
Valorado en 0 de 5
RMS and peak velocity loop powered sensors
Brand: Wilcoxon
Model: PC420VP-10

Power requirements, 2-wire loop power:
Voltage at sensor terminals 12 - 30 VDC
Mounting 1/4-28 tapped hole
Case material stainless steel
Turn on time, 4-20 mA loop 30 seconds
[P] calculated peak output, velocity
[10] PEAK 1.0 ips (25.4 mm/sec)

SIGNAL CONDITIONER, 9 to 30 Vdc, 1.5 W

Código: G408-0001
Valorado en 0 de 5
•    SIGNAL CONDITIONER Ultra SlimPak®
•    Brand: Action Instruments
•    1 Channel, Current
•    Input Range: 4-20mA
•    Output Range: 4-20mA
•    9 to 30 Vdc
•    1.5 W
 

RMS and peak acceleration loop powered sensors

Código: PC420AR-10
Valorado en 0 de 5
RMS and peak acceleration loop powered sensors      
Model: PC420AR-10
Brand: Wilcoxon

ACCEL RMS, (0-10g)
R = RMS output, acceleration
SPECIFICATIONS:
Repeatability ±2%
Frequency response:
±10% 10 Hz - 1.0 kHz
±3 dB 1.0 Hz - 2.0 kHz
Power requirements, 2-wire loop power:
Voltage at sensor terminals 12 - 30 VDC
Turn on time, 4-20 mA loop < 30 seconds
Mounting 1/4-28 tapped hole
Output connector 2 pin, MIL-C-5015 style
Mating connector R6 type
Recommended cabling J9T2A

CELDA DE CARGA, 47T, PRECISION C3

Código: RC2-47T-C3
Valorado en 0 de 5
CELDA DE CARGA, 47T, PRECISION C3
MARCA: LATHI PRECISION
RANGO DE GRAN CAPACIDAD ENTRE 1T Y 47T,
CONTRUCCION SELLADO HERMETICO IP68
SERIE RC2
CARGA NOMINAL 47T
CARGA LIMITE 80T
CARGA DE RUPTURA 190T

Cargador Medidor de vibración

Código: CARGADOR-CMAS
Valorado en 0 de 5
CARGADOR PARA CMAS 100-SL
Marca: SKF

Medidor de vibración,65mm/s

Código: CMAS100-SL
Valorado en 0 de 5
Medidor de vibración
Marca: SKF
Parámetros de Medición: Aceleración, temperatura, velocidad
Aceleración Máxima: 50g
Aceleración Mínima: 0.2g
Velocidad Máxima: 65mm/s
Velocidad Mínima: 0.7mm/s
Temperatura Máxima de Funcionamiento: +60°C
Temperatura Mínima de Funcionamiento: -10°C
Tipo de Display: LCD
Tipo de Batería: Conexión de pared ac/dc universal
Tipo de Conector: Universal